Sourcing ASRS from China
Automated storage and retrieval systems from China have 0% ordinary UK duty across the selected lines; boom-lift measures depend on product scope. Before supply in Great Britain, check conformity assessment, CE or UKCA marking, the declaration and English instructions. Cambridge China Bridge sources automated storage and retrieval systems.
Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for small orders and first imports

UK duty on automated storage and retrieval systems
Heading 8428 covers lifting, handling, loading and unloading machinery. Automated storage and retrieval systems can combine storage machines with separately supplied transfer conveyors. The table identifies relevant classification candidates, rather than interchangeable codes for a complete installation. Review the actual equipment and supply boundaries before choosing a line.
Read from the UK Trade Tariff on 17 December 2026, all selected lines carry 0% ordinary duty for goods from China. The residual machinery line, 8428 90 90 80, also lists 71.74% residual provisional anti-dumping duty and anti-dumping or countervailing registration. The selected conveyor lines list no trade remedies or import controls. No selected line lists a suspension or countervailing duty.
The provisional notice excludes goods outside its boom-lift description; sharing a code does not establish liability. For goods concerned by registration, use additional code 8C10. Ask your customs broker to confirm scope and declaration requirements for the supplied equipment. Confirm the commodity code against drawings and functions. For wider heading coverage, see goods lifts.
| Goods | Commodity code | Duty | Anti-dumping or countervailing duty on China |
|---|---|---|---|
| Other handling machinery, for classification review of storage and retrieval equipment | 8428 90 90 80 | 0% | 71.74% residual anti-dumping (provisional) |
| Roller conveyors for storage system transfers | 8428 39 20 00 | 0% | None |
| Belt conveyors for storage system transfers | 8428 33 00 00 | 0% | None |
| Other continuous-action conveyors for goods or materials | 8428 39 90 00 | 0% | None |
Specify the storage loads and retrieval sequence
Define whether the system handles pallets, totes or trays. Provide load dimensions, maximum mass, centre of gravity, underside condition and permitted overhang. Agree storage positions, aisle clearances, rack interfaces, floor conditions and maintenance access. Identify who supplies the racking, transfer conveyors, installation and commissioning.
Specify retrieval throughput using your expected order mix, travel distances and simultaneous requests. Agree barcode handling, stock-location records, warehouse software interfaces and recovery after communication or power loss. Include damaged labels, unavailable locations and interrupted transfers in the factory acceptance test. Obtain controller backups, software access arrangements and a spare-parts list.
For complete machinery supplied in Great Britain, check conformity assessment, technical file arrangements, the declaration of conformity, CE or UKCA marking and English instructions. Agree who supplies the documents for the completed installation and who commissions it.
Worked duty example
Illustrative example, not a quote: Illustrative order: powered roller transfer conveyors for a small automated storage and retrieval installation under 8428 39 20 00, invoiced at £8,000 free on board, with £1,200 of freight and insurance to the UK. The customs value is £9,200. Duty at 0% is £0. Import VAT at 20% is charged on the customs value plus duty, £9,200, so it is £1,840. With no duty, the only import tax is the VAT, which a VAT-registered importer can usually reclaim. The import duty and VAT guide explains each step.
Inspection checklist
Structure and arrival condition: compare rails, frames, transfer heights and fixing positions with approved drawings. Inspect delivered sections for distortion, corrosion, loose connections and damage to sensors or cable carriers.
Loaded movements: test representative loads at the agreed storage positions. Check positioning, transfer alignment, load stability, retrieval accuracy and performance against the agreed order mix.
Protection and recovery: have a competent engineer check guarding, access interlocks, emergency stops and maintenance isolation. Test blocked transfers, communication loss and controlled recovery without unexpected movement.
Documents and configuration: match the declaration, marking, English manual, electrical drawings and controller settings to the delivered installation. Record discrepancies in the inspection checklist.
Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us
What goes wrong
An empty demonstration can hide problems with bowed pallets, uneven tote bases or loads extending beyond their carriers. Rail misalignment and incorrect transfer heights can cause repeated jams. Test your actual load formats before shipment and repeat the agreed checks after installation.
A system can move goods correctly while losing track of their locations after a stopped transfer or network interruption. Unagreed software restrictions and missing controller backups can also obstruct recovery. Define the recovery sequence, access rights and handover files before placing the order.
Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For machinery and equipment, see machinery imports.
Frequently asked questions
What is the UK import duty on automated storage and retrieval systems from China?
Selected lines carry 0% ordinary duty. The residual machinery line also lists 71.74% provisional anti-dumping duty for goods within the boom-lift measure, which does not automatically apply to storage systems.
Does a CE certificate cover the whole storage system?
Check the declaration of conformity, marking and English instructions against the supplied configuration. Agree who provides the completed installation's documents and confirm technical file and conformity assessment arrangements.
What should I give the Chinese factory before requesting a quotation?
Provide load formats, dimensions, mass, storage layout, retrieval demand, floor information and software interfaces. Define the supply boundaries for racking, conveyors, installation and commissioning.
How should I test an automated storage and retrieval system?
Use representative loads and your expected order mix. Test transfers, retrieval accuracy, blocked locations, unreadable labels, communication loss and recovery after interrupted movements.