Sourcing metal coat hooks from China

Duty on wall-mounted metal coat hooks

Read from the UK Trade Tariff on 29 September 2026, heading 8302 covers base-metal fittings and fixtures, including hat-racks and hat-pegs. Wall-mounted metal coat hooks and all-metal hook racks fall within the description of 8302 50 00 00. The table shows product variants sharing that commodity line.

The supplied tariff data records 0% duty for goods from China on this line, with no anti-dumping or countervailing duty, suspension or attached import control. Import VAT is separate from customs duty.

Confirm the commodity code against the actual materials and construction, particularly for hooks supplied on a wooden backing. See the metal shelf support brackets guide for the wider heading and the import duty and VAT guide for the calculation method.

Specify the hook and its wall fixing together

Specify the metal and grade, casting or fabrication method, hook projection, tip shape, base dimensions, hole spacing and finish. For hook racks, agree hook spacing, backing stiffness and attachment between each hook and the rail. Approve a physical sample with the intended screws and covers.

State the intended wall substrate and agree a load test using the complete mounting arrangement. A hook tested on solid timber does not demonstrate the performance of plugs in plasterboard. Specify fitting instructions, suitable fixings and any installation limitations.

Confirm applicable safety requirements and whether you have producer responsibilities for consumer-use hooks supplied in Great Britain with the relevant authority. Producers must provide relevant information about risks that are not immediately obvious and precautions against them. Where reasonable, the product or packaging must identify the producer's name and address and the product reference or applicable batch.

Worked duty example

Illustrative example, not a quote: 2,000 wall-mounted metal coat hooks; illustrative order, not a quotation under 8302 50 00 00, invoiced at £7,000 free on board, with £600 of freight and insurance to the UK. The customs value is £7,600. Duty at 0% is £0. Import VAT at 20% is charged on the customs value plus duty, £7,600, so it is £1,520. With no duty, the only import tax is the VAT, which a VAT-registered importer can usually reclaim. The import duty and VAT guide explains each step.

Inspection checklist

Geometry: compare projection, hole spacing and screw recesses with the approved sample; check that the base sits flat and hook tips do not snag clothing.

Strength: mount samples using the agreed wall substrate and fixings, apply the agreed load, and check for bending, loose joints and fixing movement.

Finish: compare colour and gloss across the batch; inspect edges, screw holes and hook roots for burrs, exposed metal, peeling and casting defects.

Packing: check supplied screws, plugs, covers, fitting instructions and traceability details; confirm that separate hooks cannot rub through their finish in transit.

What goes wrong

A thick-looking casting can conceal weak sections at the hook root. Poorly seated screw heads leave the base loose, while unsuitable plugs can pull out even when the hook itself remains intact. Finish damage often starts where hooks touch during packing.

Retain the approved sample and record the wall substrate and fixing arrangement used in testing. Inspect production stock before dispatch and compare arrival samples with that record. See the quality inspection guide.

Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For repeat volumes, see container programmes.