Sourcing plastic urinals from China

UK duty on plastic urinals

Read from the UK Trade Tariff on 1 October 2026, heading 3922 covers plastic sanitary ware. Plastic sanitary urinals fall within the other sanitary ware line, 3922 90 00 00, subject to confirmation of the actual product. The table shows product variants sharing that line, rather than separate tariff subdivisions.

The supplied tariff data records 6% duty for goods from China, with no anti-dumping or countervailing measure, suspension or attached import control. The wider heading also covers baths, sinks and lavatory seats; see plastic utility sinks.

Confirm the material, intended use and supplied components with your customs broker using finding your commodity code. This guide concerns sanitary fixtures; ask for a separate classification assessment for handheld collection bottles or products supplied for medical use.

Bowl, mounting and flushing specification

Specify the plastic resin, wall thickness, colour, surface finish and resistance to the cleaning chemicals the buyer will use. Approve a drawing showing the bowl profile, mounting points, waste outlet and any flushing inlet. List the brackets, seals, trap and flushing components included in the carton.

For flushed models, confirm the applicable water-fittings requirements with the local water company or relevant authority. For questions about compliance in England and Wales, contact the local water company or Water Regs UK. For waterless models, agree the odour-control arrangement, replacement consumables and cleaning procedure.

Before agreeing conformity markings, establish which construction-product requirements cover the exact model and intended use. Where CE marking has been legitimately affixed, the product can continue to be supplied to the Great Britain market. Ask for model-matched supporting documents through testing and certification.

Worked duty example

Illustrative example, not a quote: Illustrative order of 300 wall-mounted plastic urinals under 3922 90 00 00, invoiced at £36,000 free on board, with £6,000 of freight and insurance to the UK. The customs value is £42,000. Duty at 6% is £2,520. Import VAT at 20% is charged on the customs value plus duty, £44,520, so it is £8,904. Import taxes total £11,424; a VAT-registered importer can usually reclaim the VAT, so the lasting cost is the £2,520 of duty. The import duty and VAT guide explains each step.

Inspection checklist

Body: compare the resin declaration and finish with the approved sample; inspect thin corners, moulding seams, sharp edges and distortion around mounting points.

Connections: measure the waste and inlet positions against the drawing; fit the agreed trap, seals and flushing connector, then check for leaks.

Function: mount a sample and check stability, drainage and retained liquid; run the agreed flushing test or check the waterless insert and seal.

Packing: check protection around rims, outlets and brackets, and inspect cartons on arrival for crushing and concealed cracks. Record defects using the quality inspection guide.

What goes wrong

A sample can look correct while the production body has thinner corners, distorted mounting holes or an outlet that does not fit the agreed trap. Poor drainage leaves liquid in the bowl, while mismatched seals cause leaks. Compare production samples with the approved drawing and assemble the actual supplied fittings.

Cleaning chemicals can dull or crack an unsuitable plastic, and waterless models can develop odour problems when the insert, seal or cleaning method differs from the approved arrangement. Test the intended cleaning routine on samples and agree replacement parts before ordering.

Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For repeat volumes, see container programmes.