Sourcing laminated glass floor panels from China
Laminated glass floor panels from China carry 0% UK duty under 7007 29 00 00, with no listed trade remedy. Confirm applicable performance documentation and marking requirements for building glass with the relevant authority; workplace floors must be suitable and safe to walk on. Agree the floor design and inspect each batch. Cambridge China Bridge sources laminated glass floor panels.
UK duty on laminated glass floor panels
Heading 7007 covers toughened and laminated safety glass. Separate laminated glass floor panels fall within the other laminated safety glass line, 7007 29 00 00. The table shows product variants sharing that line. For related building glass within the wider heading, see laminated balustrade panels.
Read from the UK Trade Tariff on 30 September 2026, the relevant line carries 0% duty for goods from China. The supplied record lists no anti-dumping or countervailing duty, suspension or attached import control. Import VAT is normally 20%; see import duty and VAT.
Confirm the code against the actual shipment, particularly if the order includes frames or a complete floor system rather than separate glass panels. Use finding your commodity code before finalising the customs description.
| Goods | Commodity code | Duty | Anti-dumping or countervailing duty on China |
|---|---|---|---|
| Clear laminated glass floor panels | 7007 29 00 00 | 0% | None |
Specify the glass build-up and floor supports
Give the factory the intended floor location and an engineer-reviewed drawing. Specify panel dimensions, the thickness and treatment of each glass layer, interlayer material, edge finish, holes and notches. Agree the support arrangement, bearing surfaces, gaskets, joints and installation orientation. Ask the engineer to assess the proposed build-up for the intended loads, deflection and behaviour after glass breakage.
Confirm applicable performance documentation and marking requirements for building laminated glass with the relevant authority. Ask for the declaration of performance and reports matching the ordered construction and intended use. Legitimately CE-marked construction products can be supplied in Great Britain without an additional UKCA mark. In England, Approved Document A covers building loads and structural elements including floors. Use testing and certification support to review the product evidence.
Workplace floors must suit the activities taking place on them. HSE also says that people should be able to walk without slipping where frequent contamination is likely. Specify the walking surface and request slip-resistance evidence for the expected wet or contaminated conditions. Agree cleaning methods, surface appearance and an approved sample before production.
Worked duty example
Illustrative example, not a quote: Illustrative stock order: 800 small clear laminated glass floor panels for modular flooring under 7007 29 00 00, invoiced at £40,000 free on board, with £5,000 of freight and insurance to the UK. The customs value is £45,000. Duty at 0% is £0. Import VAT at 20% is charged on the customs value plus duty, £45,000, so it is £9,000. With no duty, the only import tax is the VAT, which a VAT-registered importer can usually reclaim. The import duty and VAT guide explains each step.
Inspection checklist
Dimensions and supports: compare panel outlines, diagonals, thickness, holes, notches and bearing edges with the approved drawing; trial-fit a sample to the intended support.
Lamination and surface: check for edge lifting, bubbles, inclusions, cracks and scratches; compare the walking face, surface treatment and visual finish with the approved sample.
Documents and identity: match panel identifiers and batch records to the order, declaration of performance and test reports; check that the documented glass build-up matches the delivered panels.
Packing and arrival: photograph crate damage before unpacking; inspect separators, edge protection and panel movement. Record defects against panel identifiers using quality inspection.
Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us
What goes wrong
A supplier may offer glass tested for another application or a different support arrangement. Ask the engineer to compare the reported specimen, glass build-up and supports with the actual floor design. Treat a generic safety-glass report as a starting point for review, rather than sufficient evidence of the proposed floor's performance.
A finish approved for appearance may give unsuitable grip in use, while reversed panels can put the treated face underneath. Edge damage, delamination and inaccurate dimensions can also prevent acceptance. Agree surface orientation, acceptance criteria, packing and replacement arrangements before shipment.
Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For own-brand ranges, see sourcing for brands.
Frequently asked questions
What is the UK import duty on laminated glass floor panels from China?
The supplied tariff record gives 0% duty under 7007 29 00 00, with no listed anti-dumping or countervailing duty, suspension or attached import control.
Do glass floor panels need UKCA marking?
Ask for performance documents matching the ordered panels and intended use.
What thickness should laminated glass floor panels be?
Ask the project engineer to specify the glass build-up against panel size, supports, intended loads, deflection and behaviour after breakage. Confirm the factory will manufacture that exact construction.
What should I check when glass floor panels arrive?
Check crate damage, dimensions, bearing edges, cracks, bubbles, delamination and walking-surface orientation. Match panel identifiers to the order and reports, then trial-fit a sample.