Sector guides

Sourcing gravity roller conveyors from China

Gravity roller conveyors from China carry 0% ordinary UK duty under 8428 39 20 00, with no listed trade remedy. Workplace equipment safety duties still apply: confirm the product supply rules for the actual unpowered design and test load control. Cambridge China Bridge sources gravity roller conveyors.

Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for small orders and first imports

Written by Bono Xu, Founder, Cambridge China Bridge · 4 min read · Updated 2026-12-10

Illustrative image: A short unpowered gravity roller conveyor with parallel shiny steel rollers between side rails and four adjustable supporting legs, a cardboard box resting on it.
Illustrative image

UK duty on gravity roller conveyors

Heading 8428 covers lifting, handling, loading and unloading machinery. Its roller conveyor line is 8428 39 20 00. The other table rows compare neighbouring conveyor categories for mixed installations; they are not interchangeable codes for gravity roller conveyors.

Read from the UK Trade Tariff on 10 December 2026, the roller conveyor line carried 0% ordinary duty for goods from China, with no listed anti-dumping or countervailing duty, suspension or import control. The comparison lines also carried 0%. Measures attached to other machinery in this heading should not be transferred to the roller conveyor line.

Confirm the commodity code against the supplied assembly and any separately supplied transfer equipment. For the wider heading context and motor-driven roller sections, see powered roller conveyors.

UK duty on these lines for goods of Chinese origin (one code per row), read from the UK Trade Tariff on 10 December 2026.
GoodsCommodity codeDutyAnti-dumping or countervailing duty on China
Roller conveyors, including gravity roller conveyors8428 39 20 000%None
Belt conveyors, for comparison with adjoining belt sections8428 33 00 000%None
Other continuous-action conveyors, for classification comparison8428 39 90 000%None
Continuous-action conveyors designed for underground use, for comparison8428 31 00 000%None

Specify roller pitch, slope and load control

Give the factory the smallest carton footprint, heaviest load and underside condition. Agree usable width, roller diameter, pitch, bearing type, frame material, support spacing and entry and discharge heights. State whether loads travel downhill or are pushed along a level section. For expandable conveyors, specify the working layout and pitch when extended.

Agree the working slope using representative loads rather than an empty conveyor demonstration. Specify side guides, end stops, any braking rollers and the receiving arrangement. Test light cartons for stalling and heavy cartons for excessive speed. Check curved sections, transfer gaps and the force needed to release a queued load.

Confirm the applicable product supply rules for the actual design before sale or use in Great Britain. HSE excludes machinery powered by human or animal effort from machinery rules, while retaining directly human-powered lifting machines in scope; obtain advice on the gravity assembly rather than assuming its status from the absence of a motor. Supply-chain safety obligations include safe-use instructions and necessary testing or examination. Workplace use remains subject to work equipment safety duties.

Worked duty example

Illustrative example, not a quote: Illustrative gravity roller conveyor installation for a small warehouse under 8428 39 20 00, invoiced at £8,000 free on board, with £1,200 of freight and insurance to the UK. The customs value is £9,200. Duty at 0% is £0. Import VAT at 20% is charged on the customs value plus duty, £9,200, so it is £1,840. With no duty, the only import tax is the VAT, which a VAT-registered importer can usually reclaim. The import duty and VAT guide explains each step.

Inspection checklist

Rollers and bearings: check free rotation, shaft retention, pitch and usable width against the drawing. On arrival, look for bent shafts, seized bearings and rollers displaced during transport.

Frame and supports: check straightness, joints, bracing and height adjustment. Test stability in the agreed layout, including castor brakes and extension locks where fitted.

Loaded travel: test representative cartons through curves and transfers at the intended slope. Check stalling, skewing, runaway loads, carton damage and the holding and release of queued loads.

Safety and records: check accessible trapping points, sharp edges, side guides and end stops. Match assembly, loading and maintenance instructions to the delivered configuration. Record results using the agreed inspection checklist.

Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us

What goes wrong

A slope that moves a heavy rigid carton may leave a light or soft-bottomed carton stationary. Increasing the slope can then make heavier loads strike the end stop or the next carton too hard. Excessive roller spacing, rough bearings and misaligned transfers cause further stalls. Test the actual packaging across the intended load range.

Expandable frames change roller spacing as they open, leaving small cartons poorly supported. Loose supports, damaged shafts and weak end stops may only become apparent under queued loads. Record the agreed layout and loaded test before shipment, then repeat the functional checks after installation.

Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For machinery and equipment, see machinery imports.

Frequently asked questions

What is the UK import duty on gravity roller conveyors from China?

The supplied tariff data shows 0% ordinary duty under 8428 39 20 00, with no listed trade remedy, suspension or import control. Confirm the code against the supplied assembly.

Do gravity roller conveyors need CE or UKCA marking?

Confirm which product supply rules cover the actual unpowered assembly and its integration into other equipment. Agree any applicable marking and documents before ordering; absence of a motor alone is not a compliance assessment.

What slope should a gravity roller conveyor have?

Agree the slope through loaded trials with your actual packaging. Check that light cartons move reliably and heavy cartons remain controlled at curves, transfers and the discharge.

How do I choose roller spacing for small cartons?

Give the factory the smallest carton footprint and underside condition. Agree pitch on the drawing and test support across transfers and curves, including the extended layout of an expandable conveyor.

Sources

  1. UK Trade Tariff — commodity codes and duty
  2. HSE: UK law on the design and supply of products
  3. HSE: Equipment and machinery frequently asked questions
  4. HSE: Provision and Use of Work Equipment Regulations overview

Monthly email

What changed for UK buyers from China, and when to act

One email at the start of each month. Every figure has an official source.

One email a month. Unsubscribe with one click. Privacy

Discuss your sourcing project

Tell us the product, quantity and destination. Our own staff in China verify factories, follow production and inspect before shipment. We reply the same working day to confirm receipt and arrange next steps.

Discuss your sourcing project
Get a quote