Sourcing Boiler Ash Ejectors from China
Boiler ash ejectors and their dedicated parts classified under heading 8404 carry 0% UK duty from China across the relevant lines. Pressure equipment rules depend on the supplied design, with exclusions to check before ordering. Cambridge China Bridge sources boiler ash ejectors.
Duty on boiler ash ejectors
Heading 8404 covers auxiliary plant for boilers of heading 8402 or 8403, condensers for steam or other vapour power units, and parts. For this guide, the relevant lines are boiler auxiliary plant and its parts. The table separates purchasing variants sharing those codes; it does not represent separate tariff subdivisions.
Read from the UK Trade Tariff on 1 October 2026, the relevant lines carried 0% duty for goods from China. The supplied tariff record lists no anti-dumping or countervailing duty, suspensions or attached import controls. Import VAT is normally 20%.
Confirm the commodity code using the operating description, assembly drawing and supply scope, especially for separately shipped nozzles or bodies. See economisers and boiler auxiliary plant for the wider heading.
| Goods | Commodity code | Duty | Anti-dumping or countervailing duty on China |
|---|---|---|---|
| Steam-operated boiler ash ejectors, when classified as boiler auxiliary plant | 8404 10 00 00 | 0% | None |
| Replacement ash ejector bodies, when classified as boiler auxiliary plant parts | 8404 90 00 00 | 0% | None |
Specify the ash and motive-fluid duty
State whether the ejector uses steam, compressed air or water. Specify ash temperature, moisture, particle size, required discharge capacity, conveying route and outlet back-pressure. Record available motive-fluid pressure and flow at the connection. Agree nozzle geometry, abrasion-resistant materials, replaceable liners, inspection access and flange drawings.
For supply in Great Britain, pressure equipment and assemblies with maximum allowable pressure above 0.5 bar fall within the pressure equipment rules, subject to exclusions. Ask the supplier to identify which supplied pressure-containing components are covered. The importer must ensure covered equipment has instructions in clear, legible and easily understandable English.
If the supplied assembly is machinery, compliance includes essential health and safety requirements, conformity assessment, a declaration of conformity and the relevant conformity marking. A copy of the declaration must accompany the machinery. Agree the compliance scope before approving manufacture.
Worked duty example
Illustrative example, not a quote: Illustrative order: two boiler ash ejectors under 8404 10 00 00, invoiced at £28,000 free on board, with £4,000 of freight and insurance to the UK. The customs value is £32,000. Duty at 0% is £0. Import VAT at 20% is charged on the customs value plus duty, £32,000, so it is £6,400. With no duty, the only import tax is the VAT, which a VAT-registered importer can usually reclaim. The import duty and VAT guide explains each step.
Inspection checklist
Connections: compare inlet, outlet, mounting positions and flange drilling with the approved drawings; repeat these checks on arrival.
Wear parts: check nozzle bore, throat alignment, liner seating and material certificates against the agreed specification.
Performance: witness an agreed ash-handling trial at the specified motive-fluid conditions and outlet resistance; record blockages, leakage and discharge behaviour.
Documents and packing: match component identification to test records and applicable conformity documents; inspect capped openings, internal cleanliness and transit damage. Use the inspection guide to plan checks.
Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us
What goes wrong
A clean-air demonstration can miss problems with damp or coarse ash. An unsuitable nozzle or throat can restrict discharge, while poor alignment and incorrectly fitted liners can expose the body to wear. Agree a representative test material and acceptance conditions rather than accepting a demonstration without recorded operating conditions.
Connection mismatches, unsupported pipe loads and inaccessible wear parts create installation and maintenance problems. Review the assembly drawing with the boiler contractor, confirm who supplies valves and pipework, and reserve space to remove the nozzle and liners.
Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For machinery and equipment, see machinery imports.
Frequently asked questions
What is the UK import duty on boiler ash ejectors from China?
The supplied tariff record shows 0% on boiler auxiliary plant under 8404 10 00 00 and parts under 8404 90 00 00, with no listed anti-dumping or countervailing duty.
Do boiler ash ejectors need pressure equipment compliance?
Check the supplied design. Pressure equipment rules cover equipment and assemblies above 0.5 bar maximum allowable pressure, subject to exclusions. Ask the supplier to identify the covered components.
What should I specify before ordering an ash ejector?
Specify ash condition, discharge capacity, motive fluid and available pressure and flow, outlet resistance, connection drawings, wear materials and access for replacing nozzles and liners.
How should I test a boiler ash ejector?
Agree a trial using representative ash and the intended motive-fluid conditions and outlet resistance. Check discharge behaviour, leakage and blockages, then inspect wear parts and connections on arrival.