Sourcing wood-cutting bandsaw blades from China
Wood-cutting bandsaw blades from China carry 0% UK duty; the wider heading ranges from 0% to 2%. Workplace supply duties include safe-use information and necessary testing or examination. Specify blade dimensions, tooth geometry and weld quality. Cambridge China Bridge sources wood-cutting bandsaw blades.
Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for small orders and first imports

Bandsaw blades carry 0% duty
Heading 8202 covers handsaws and saw blades of all kinds. Wood-cutting bandsaw blades fall within the bandsaw-blade line, 8202 20 00 00. The table shows product variants sharing this code, rather than separate tariff subdivisions.
Read from the UK Trade Tariff on 30 September 2026, bandsaw blades from China carried 0% duty. The supplied tariff record lists no anti-dumping or countervailing duty, steel measure, suspension or attached import control for this line. Other saw-blade lines within the heading carry 2%.
Confirm the commodity code against the actual blade and shipment description before ordering. For the related product family within this heading, see the metal-cutting bandsaw blades guide.
| Goods | Commodity code | Duty | Anti-dumping or countervailing duty on China |
|---|---|---|---|
| Carbon steel wood-cutting bandsaw blades | 8202 20 00 00 | 0% | None |
Specify the blade, timber and machine together
State whether you need welded loops or coil stock. Specify finished loop length, width, thickness, steel grade, tooth pitch, tooth profile, rake angle and tooth set. Identify the machine, wheel diameter and intended timber, including whether it is wet or dry. Agree dimensional tolerances and a cutting sample using the buyer's timber.
For welded loops, agree weld alignment, finishing and the method for checking the weld after heat treatment. Request material and hardness records linked to each batch. Compare straight ripping, resawing or curved-cutting performance with the approved sample rather than accepting a general claim that a blade suits woodworking.
Ask for fitting, tensioning, operating and handling information suited to the blade and intended machine. Businesses importing or selling consumer products are also responsible for their safety.
Worked duty example
Illustrative example, not a quote: Illustrative batch of welded wood-cutting bandsaw blades under 8202 20 00 00, invoiced at £2,000 free on board, with £740 of freight and insurance to the UK. The customs value is £2,740. Duty at 0% is £0. Import VAT at 20% is charged on the customs value plus duty, £2,740, so it is £548. With no duty, the only import tax is the VAT, which a VAT-registered importer can usually reclaim. The import duty and VAT guide explains each step.
Inspection checklist
Dimensions: measure loop length, blade width and thickness against the drawing; check that pack labels identify the actual blade supplied.
Teeth and material: compare pitch, profile and set with the approved sample; inspect for damaged teeth and check material and hardness records against the batch.
Weld and cutting: inspect weld alignment, surface finishing and visible cracks; trial sample loops on the intended machine and timber, comparing tracking, cut finish and weld behaviour.
Packing and records: check tooth protection, restrained coils, corrosion protection and batch identification. Include these checks in the inspection brief and repeat them when stock arrives.
Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us
What goes wrong
A loop can match the nominal length but still track poorly because the weld is misaligned or the blade is twisted. Uneven tooth set makes cuts wander; unsuitable tooth geometry can leave rough cuts or clog with sawdust. Compare samples under the same cutting conditions, and keep the approved blade for shipment checks.
Coils can arrive kinked, rusted or with teeth damaged by loose packing. Keep suspect blades out of use pending assessment. HSE notes that clicking can indicate a cracked blade, so investigate clicking during a cutting trial before continuing.
Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For repeat volumes, see container programmes.
Frequently asked questions
What is the UK import duty on wood-cutting bandsaw blades from China?
The supplied tariff record gives 0% duty under 8202 20 00 00, with no listed anti-dumping or countervailing duty, suspension or attached import control.
What should I put in a wood-cutting bandsaw blade specification?
State loop or coil supply, dimensions, steel grade, tooth pitch, profile, rake and set, plus the machine and timber. Agree weld checks and cutting acceptance against an approved sample.
How do I check welded bandsaw loops?
Check loop length, weld alignment, finishing and visible cracks. Trial samples on the intended machine and timber, comparing tracking and cut finish with the approved sample.
Why does a new bandsaw blade click?
HSE says clicking can indicate a cracked blade. Stop the trial and have the blade assessed before continuing; include the weld in the examination.