Sector guides

Sourcing hacksaw blades from China

Metal-cutting hacksaw blades from China carry 2% UK duty across the relevant variants, with no listed trade remedies. For blades supplied for use at work, confirm applicable safety and safe-use information requirements with the relevant authority. Specify tooth pitch, steel grade and frame fit. Cambridge China Bridge sources hacksaw blades.

Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for small orders and first imports

Written by Bono Xu, Founder, Cambridge China Bridge · 4 min read · Updated 2026-11-22

A fine toothed hacksaw blade tensioned inside a red metal hacksaw frame.

Hacksaw blade duty and classification

Read from the UK Trade Tariff on 30 September 2026, heading 8202 covers handsaws and saw blades. Metal-cutting hacksaw replacement blades fall within 8202 91 00 00, straight saw blades for working metal. The table shows product variants sharing this code, rather than separate tariff subdivisions.

The relevant line carries 2% duty for goods from China. The supplied tariff record lists no anti-dumping or countervailing measures, suspensions, steel measure or attached import controls for this line.

Confirm the intended cutting material and whether the shipment contains replacement blades or complete saws using the commodity code guide. A blade and a complete saw should not be treated as interchangeable descriptions on the order or customs paperwork.

UK duty on these lines for goods of Chinese origin (one code per row), read from the UK Trade Tariff on 30 September 2026.
GoodsCommodity codeDutyAnti-dumping or countervailing duty on China
Carbon steel hacksaw blades for metal8202 91 00 002%None

Specify the teeth and hacksaw frame fit

State whether the blade is for a full-size or junior hacksaw. Supply overall length, width, thickness, mounting-hole diameter and hole spacing, with a drawing and the intended frame. Agree tooth pitch, tooth set, cutting direction and the metals and sections it will cut.

Specify carbon steel, high speed steel or bimetal construction, including the material grades and heat treatment. For bimetal blades, identify both the tooth material and backing material. Agree hardness checks and a cutting trial in the intended frame against an approved sample.

Consumer blades sold in Great Britain must be safe in normal or reasonably foreseeable use. Request instructions covering fitting, tensioning, sharp teeth and recognising damaged blades.

Worked duty example

Illustrative example, not a quote: Illustrative order of 10,000 bimetal hacksaw blades for a tool wholesaler; FOB value and freight are illustrative, not a quotation under 8202 91 00 00, invoiced at £35,000 free on board, with £2,000 of freight and insurance to the UK. The customs value is £37,000. Duty at 2% is £740. Import VAT at 20% is charged on the customs value plus duty, £37,740, so it is £7,548. Import taxes total £8,288; a VAT-registered importer can usually reclaim the VAT, so the lasting cost is the £740 of duty. The import duty and VAT guide explains each step.

Inspection checklist

Frame fit: measure blade dimensions and mounting holes against the drawing; fit samples to the intended frame and check that they seat and tension correctly.

Material and teeth: compare material records with the agreed grades; check sample hardness, tooth pitch, tooth set and chipped or missing teeth.

Cutting trial: cut the agreed metal and section in the intended frame; compare cutting effort, cut straightness, tooth wear and breakage with the approved sample.

Arrival condition: check for rust, bent bodies and damaged teeth; verify pack contents, identification and instructions, and ensure packing protects the teeth. Agree sampling through the inspection guide.

Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us

What goes wrong

A blade can match the stated length yet fail to fit because the mounting holes are misplaced. A tooth pitch unsuited to the workpiece can snag on thin sections or clog during thicker cuts. Check frame fit and cutting performance together before approving production.

Soft teeth lose their cutting edge, brittle teeth chip, and uneven tooth set makes the cut wander. Poor bonding between the tooth strip and backing can cause bimetal blades to separate. Loose or damp packing can leave otherwise usable blades bent or rusty. Compare shipment samples with the approved blade and hold damaged stock for assessment.

Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For repeat volumes, see container programmes.

Frequently asked questions

What is the UK import duty on hacksaw blades from China?

Metal-cutting hacksaw blades under 8202 91 00 00 carry 2% duty. The supplied tariff record lists no anti-dumping or countervailing measures, suspensions or attached import controls for this line.

Which commodity code covers hacksaw replacement blades?

8202 91 00 00 covers straight saw blades for working metal. Confirm the intended cutting material and distinguish replacement blades from complete hacksaws before declaring the goods.

What should I specify when buying hacksaw blades?

Specify material grades, construction, heat treatment, blade dimensions, mounting holes, tooth pitch and tooth set. Name the intended frame, workpiece material and section, and approve a cutting trial.

How do I check bimetal hacksaw blades on arrival?

Check frame fit, straightness, tooth condition, material records and sample hardness. Trial cuts against the approved sample and inspect for separation between the tooth strip and backing, corrosion and packing damage.

Sources

  1. UK Trade Tariff — commodity codes and duty
  2. HSE: equipment and machinery frequently asked questions
  3. General product safety regulations: Great Britain

Monthly email

What changed for UK buyers from China, and when to act

One email at the start of each month. Every figure has an official source.

One email a month. Unsubscribe with one click. Privacy

Discuss your sourcing project

Tell us the product, quantity and destination. Our own staff in China verify factories, follow production and inspect before shipment. We reply the same working day to confirm receipt and arrange next steps.

Discuss your sourcing project
Quote for hacksaw blades