Sourcing moulded glass pool coping from China
Moulded glass pool coping tiles from China carry 0% UK duty within heading 7016, with no anti-dumping duty shown. Workplace flooring must suit its intended activity, so check wet-surface performance and construction-product documentation before ordering. Cambridge China Bridge sources moulded glass pool coping tiles.
Duty on moulded glass pool coping tiles
Read from the UK Trade Tariff on 2 October 2026, heading 7016 covers pressed or moulded glass construction articles, including tiles, alongside glass mosaic smallwares and other listed forms. For moulded glass coping made as construction tiles, 7016 90 70 00 is the candidate residual line. The table shows buying forms against that same line, rather than separate tariff subdivisions.
The supplied tariff snapshot shows 0% duty across the heading for goods from China, with no anti-dumping or countervailing measures, suspensions or attached import controls listed. Zero customs duty does not remove import VAT; see UK import duty and VAT.
Confirm the commodity code using the material, manufacturing process, drawings and intended construction use. Describe the product as moulded glass coping rather than simply pool tiles. For other products within the heading, see glass blocks and glass mosaic.
| Goods | Commodity code | Duty | Anti-dumping or countervailing duty on China |
|---|---|---|---|
| Other moulded glass construction tiles: straight pool coping | 7016 90 70 00 | 0% | None |
Specify the coping profile and wet surface
Specify length, width, thickness, edge radius, overhang, underside bonding surface and the intended fall towards drainage. Supply drawings for straight runs, curves, corners and end pieces. Agree dimensional tolerances with the installer, and approve an assembled sample against the pool edge and adjacent paving.
State whether the coping is for an indoor or outdoor pool. Ask for evidence covering wet barefoot use, pool-water exposure, cleaning chemicals and outdoor frost exposure where relevant. Match reports to the actual surface finish and colour treatment. HSE states that workplace flooring must be suitable for the activity taking place on it.
Ask which designated construction-product standard or technical assessment covers the exact product and intended use, and request the applicable performance declaration, marking evidence and test reports. CE marking continues to be available for construction products placed on the Great Britain market. Settle product-specific evidence through testing and certification before approving production.
Worked duty example
Illustrative example, not a quote: Illustrative order: 6,000 moulded glass pool coping tiles under 7016 90 70 00, invoiced at £9,000 free on board, with £2,500 of freight and insurance to the UK. The customs value is £11,500. Duty at 0% is £0. Import VAT at 20% is charged on the customs value plus duty, £11,500, so it is £2,300. With no duty, the only import tax is the VAT, which a VAT-registered importer can usually reclaim. The import duty and VAT guide explains each step.
Inspection checklist
Profile and fit: measure sampled pieces against the drawing and assemble a run with a corner. Check overhang, joint alignment, underside contact and any rocking or raised edges.
Glass and edges: inspect for cracks, chips, inclusions and sharp mould seams. Check the rounded edge continuously, especially where corners and end pieces meet.
Surface and colour: compare texture and colour with the approved sample under consistent lighting. Match wet-surface reports to the supplied finish; visual inspection cannot establish slip performance.
Packing and arrival: check dividers, edge protection, carton identification and separation of profiles. Open cartons from different pallet positions on arrival, record breakage and isolate cracked pieces. Use the quality inspection guide to brief the inspector.
Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us
What goes wrong
A polished sample may look suitable while providing poor grip when wet. Profile variation can leave uneven joints or a rocking edge, and corner pieces can expose sharp transitions. Colour treatments or backing layers may change appearance or lose adhesion after exposure to pool water and cleaning products.
Agree an assembled approval sample and evidence for the actual finish before production. Check the adhesive and grout proposal with the installer. Keep profiles and colour batches identifiable, and record transit damage before mixing stock or installing it.
Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For own-brand ranges, see sourcing for brands.
Frequently asked questions
What is the UK import duty on glass pool coping tiles from China?
The supplied tariff snapshot shows 0% under heading 7016. For moulded glass construction tiles, confirm candidate code 7016 90 70 00. No anti-dumping or countervailing measure is listed.
Do moulded glass pool coping tiles need CE marking?
Check the standard or technical assessment covering the exact product and intended use, then request applicable marking and performance documents. CE marking remains available for construction products on the Great Britain market.
How do I check whether glass coping is suitable when wet?
Request wet barefoot test evidence for the actual finish and have the pool designer assess suitability. A textured appearance or a supplier's non-slip description does not establish performance.
What should I check when the coping tiles arrive?
Check cracks, chipped or sharp edges, profile dimensions, colour consistency and carton identification. Assemble straight and corner pieces against the approved layout before releasing stock for installation.