Sourcing metal swivel snap hooks from China
Metal swivel snap hooks within heading 8308 carry 2% UK duty from China, so the duty range is a single rate. Consumer products supplied in Great Britain must be safe in normal or reasonably foreseeable use. Specify strap fit, gate closure and swivel strength. Cambridge China Bridge sources metal swivel snap hooks.
Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for UK manufacturers and engineering firms

Duty and classification for swivel snap hooks
Heading 8308 covers base-metal hooks and similar fittings of a kind used for clothing accessories, leather goods, travel goods, saddlery and other made-up articles. This guide concerns metal swivel snap hooks within that scope. The hooks, eyes and eyelets line is 8308 10 00 00.
Read from the UK Trade Tariff on 30 September 2026, the supplied lines carry 2% duty for goods from China. The supplied record lists no anti-dumping or countervailing duty, suspension or attached import control. This describes the tariff record, rather than establishing that every intended use meets product rules.
The table repeats the hook code for different applications; these are product variants, rather than separate tariff lines. Send photographs, drawings, material details and the intended use to your customs broker to confirm the commodity code. For the wider heading, see buckles, eyelets and rivets.
| Goods | Commodity code | Duty | Anti-dumping or countervailing duty on China |
|---|---|---|---|
| Base-metal swivel snap hooks for bag straps | 8308 10 00 00 | 2% | None |
Specify the strap eye, gate and swivel joint
State the base metal and finish separately. Specify overall length, clear strap-eye width and depth, gate opening, hook throat and dimensional tolerances. Send the actual webbing and mating ring for sample approval. Agree spring resistance, complete gate closure, swivel movement and a load test using the intended assembly, including how failure is assessed.
Confirm with HSE whether UK REACH nickel-release restrictions apply to the intended skin contact and whether lead restrictions apply to parts children could put in their mouths. Ask for reports matching the material and finish supplied, with testing and certification support where needed.
Worked duty example
Illustrative example, not a quote: 2,000 metal swivel snap hooks for bag straps; quantity, FOB and freight values are illustrative under 8308 10 00 00, invoiced at £1,500 free on board, with £600 of freight and insurance to the UK. The customs value is £2,100. Duty at 2% is £42. Import VAT at 20% is charged on the customs value plus duty, £2,142, so it is £428.40. Import taxes total £470.40; a VAT-registered importer can usually reclaim the VAT, so the lasting cost is the £42 of duty. The import duty and VAT guide explains each step.
Inspection checklist
Fit: measure the clear strap eye and gate opening against the approved drawing; fit samples to the intended webbing and ring, checking bunching, snagging and restricted movement.
Closure: operate the gate repeatedly and release it from different positions; check that it returns fully, seats correctly and does not stick against the hook body.
Retention: check the swivel joint for excessive play and separation; carry out the agreed load and repeated-operation checks on the assembled strap, recording deformation and gate behaviour.
Finish and packing: inspect for burrs, casting cracks, exposed base metal, corrosion and colour variation; compare with the retained sample and check pack counts and batch identification. Arrange a quality inspection.
Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us
What goes wrong
A hook can match the advertised overall length yet have an eye too narrow for the strap or a throat that cannot accept the mating ring. Plating build-up can make the gate stick. A loose swivel joint can pull apart, while a weak spring leaves the gate partly open. Burrs can cut webbing or scratch hands.
Approve the hook in its intended assembly and retain that sample. Agree checks for spring action, swivel retention, surface wear and corrosion before production. Compare production samples with the approved material and finish, and investigate changes to the casting, spring or joint construction before accepting the batch.
Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For repeat volumes, see container programmes.
Frequently asked questions
What is the UK import duty on metal swivel snap hooks from China?
The supplied tariff record shows 2% for hooks under 8308 10 00 00, with no anti-dumping or countervailing duty recorded. Confirm that this code describes the actual hook and its intended use.
Which dimensions should I give the snap-hook factory?
Specify clear strap-eye width and depth, gate opening, hook throat, overall length and tolerances. Provide the actual webbing and mating ring so the supplier can check the assembled fit.
How do I check a swivel snap hook is strong enough?
Agree a load test and repeated-operation checks for the intended assembly. Check swivel retention, deformation and gate closure. Ask for reports identifying the exact material, model and test arrangement.
Do plated swivel snap hooks need nickel testing?
For articles intended for direct and prolonged skin contact, confirm with HSE whether UK REACH nickel-release restrictions apply. For that use, ask for a report matching the hook and finish; a colour description does not establish compliance.