Sector guides

Sourcing metal-ended treasury tags from China

Metal-ended treasury tags considered under heading 8305 carry a flat 2% UK duty from China, subject to confirming classification. Tags sold as consumer products must be safe in normal or reasonably foreseeable use. Cambridge China Bridge sources metal-ended treasury tags.

Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for UK manufacturers and engineering firms

Written by Bono Xu, Founder, Cambridge China Bridge · 3 min read · Updated 2026-11-24

Illustrative image: A small bundle of green braided treasury tags with short silver metal T-bar ends, several loose tags beside a punched stack of paper with one tag threaded through the holes.
Illustrative image

Duty and classification for treasury tags

Read from the UK Trade Tariff on 30 September 2026, heading 8305 covers base-metal binder and file fittings, clips, indexing tags and similar office articles, together with staples in strips. For metal-ended treasury tags, confirm whether the supplied article belongs under 8305 90 00 00, described as other, including parts.

The supplied record shows 2% duty for goods from China on this line, with no anti-dumping or countervailing duty, suspension or attached import control recorded. The table repeats this candidate code for treasury-tag variants; these are product descriptions, rather than separate tariff lines.

Give your customs broker a sample, photographs and details of the cord and metal ends to confirm the commodity code. For the wider heading, see metal split-pin paper fasteners.

UK duty on these lines for goods of Chinese origin (one code per row), read from the UK Trade Tariff on 30 September 2026.
GoodsCommodity codeDutyAnti-dumping or countervailing duty on China
Metal-ended treasury tags with cotton cord, subject to classification8305 90 00 002%None

Specify the cord and metal ends

Specify usable cord length between the metal ends separately from overall length. State cord material, colour, thickness and construction, together with metal-end dimensions, material and finish. Provide the punched paper and file cover the tags must pass through, and agree the document thickness they must hold.

Agree crimp construction, end-retention testing and acceptable fraying against an approved sample. Specify pack quantity, length identification and packing that keeps cords untangled. Treasury tags sold as consumer products in Great Britain must be safe in normal or reasonably foreseeable use.

Worked duty example

Illustrative example, not a quote: 2,000 retail packs of metal-ended treasury tags; illustrative quantity, FOB value and freight under 8305 90 00 00, invoiced at £2,500 free on board, with £600 of freight and insurance to the UK. The customs value is £3,100. Duty at 2% is £62. Import VAT at 20% is charged on the customs value plus duty, £3,162, so it is £632.40. Import taxes total £694.40; a VAT-registered importer can usually reclaim the VAT, so the lasting cost is the £62 of duty. The import duty and VAT guide explains each step.

Inspection checklist

Dimensions: measure usable cord length and metal-end dimensions against the approved sample; pass the ends through the intended punched holes.

Retention: pull the cord against each metal end using the agreed test method; check for slipping, detached ends and fibres cut by the crimp.

Finish: check metal ends for burrs, sharp edges, rust and exposed cut surfaces; inspect cords for fraying and colour transfer onto paper.

Packing: check pack counts, length labels and mixed variants; open arrival cartons for dampness, tangled cords and crushed ends. Use the quality inspection guide to brief the inspector.

Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us

What goes wrong

Overall length can match the order while usable cord length is too short because more cord sits inside the crimps. Oversized metal ends catch in punched holes, loose crimps release the cord, and sharp crimp edges cut fibres or scratch users.

Compare production tags with the approved sample while holding the intended paper stack and cover. Check both end retention and threading ease. Damp packing can leave rust marks on documents, while mixed lengths and tangled bulk packs make otherwise usable stock difficult to distribute.

Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For repeat volumes, see container programmes.

Frequently asked questions

What is the UK import duty on metal-ended treasury tags from China?

The supplied tariff record shows 2% under 8305 90 00 00, with no anti-dumping or countervailing duty recorded. Confirm that this code describes your tags.

How should I specify treasury-tag length?

Approve the tag with the intended paper stack and file cover.

How do I check that the metal ends will stay attached?

Agree an end-retention test with the factory. Test production samples for cord slipping, detached ends and fibres damaged by the crimp.

What should I check when treasury tags arrive?

Check usable length, threading through punched holes, end retention, burrs, rust, cord fraying and pack counts. Look for damp cartons and mixed lengths.

Sources

  1. UK Trade Tariff — commodity codes and duty
  2. General product safety regulations: Great Britain

Monthly email

What changed for UK buyers from China, and when to act

One email at the start of each month. Every figure has an official source.

One email a month. Unsubscribe with one click. Privacy

Discuss your sourcing project

Tell us the product, quantity and destination. Our own staff in China verify factories, follow production and inspect before shipment. We reply the same working day to confirm receipt and arrange next steps.

Discuss your sourcing project
Get a quote