Sourcing men's Harrington jackets from China
Men's woven Harrington jackets from China carry 12% UK duty across the relevant tariff lines, so the duty range is a single rate. For Great Britain, fibre composition labelling applies and importers are responsible for product safety. Cambridge China Bridge sources men's woven Harrington jackets.
UK duty on woven Harrington jackets
Read from the UK Trade Tariff on 2 October 2026, heading 6201 covers men's or boys' overcoats, anoraks, wind-cheaters, wind-jackets and similar garments. The selected lines are candidates for men's woven Harrington wind-jackets, rather than tailored jackets. Cotton and man-made fibre lines divide at a finished garment weight of 1 kg. All selected lines carry 12% duty for goods from China, with no listed anti-dumping or countervailing duty and no listed suspension.
The tariff attaches cat and dog fur import and export controls and a seal-product import control. Imports and exports of cat or dog fur, including products made from it, are banned. Seal products can only be imported and sold in limited cases under strict conditions. The tariff specifies supporting documents for seal products; confirm admissibility and the exact documentary requirement with your customs broker before ordering any seal-derived trim from China.
Confirm the outer fabric composition, garment construction and finished weight before choosing the commodity code. A style name alone does not settle classification. See the men's woven bomber jackets guide for the wider heading and the UK duty and VAT guide for the calculation method.
| Goods | Commodity code | Duty | Anti-dumping or countervailing duty on China |
|---|---|---|---|
| Men's cotton woven Harrington jackets, not exceeding 1 kg, other than batik | 6201 30 10 99 | 12% | None |
| Men's cotton woven Harrington jackets, exceeding 1 kg, other than batik | 6201 30 90 99 | 12% | None |
| Men's man-made fibre woven Harrington jackets, not exceeding 1 kg | 6201 40 10 90 | 12% | None |
| Men's man-made fibre woven Harrington jackets, exceeding 1 kg | 6201 40 90 90 | 12% | None |
Specify the shell, collar and ribbing
Specify the woven shell's fibre composition, weave, weight, colour and finish, together with the lining composition and check pattern. Approve collar height and shape, throat fastening, raglan or set-in sleeves, pocket flaps, back yoke and hem length. Give the factory a measurement chart with tolerances and an approved sample showing how the jacket sits when zipped.
Agree cuff and waistband ribbing, stretch recovery, zip material and puller, pocket reinforcement and lining ease. Ask for wash trials on finished garments to reveal shell, lining and ribbing shrinkage differences. Fibre composition labelling is required in Great Britain. Importers are responsible for consumer product safety, so include checks for sharp zip edges, insecure fastenings and broken needles in the inspection brief.
Worked duty example
Illustrative example, not a quote: 500 men's cotton woven Harrington jackets, not exceeding 1 kg each; illustrative order under 6201 30 10 99, invoiced at £11,800 free on board, with £800 of freight and insurance to the UK. The customs value is £12,600. Duty at 12% is £1,512. Import VAT at 20% is charged on the customs value plus duty, £14,112, so it is £2,822.40. Import taxes total £4,334.40; a VAT-registered importer can usually reclaim the VAT, so the lasting cost is the £1,512 of duty. The import duty and VAT guide explains each step.
Inspection checklist
Fit and collar: measure chest, sleeve, body length and collar against the approved chart; check sleeve movement and that the collar and zip front sit evenly.
Shell and lining: compare colour and handle with the approved sample; check lining pattern alignment, seam puckering, colour transfer and distortion after washing.
Ribs and fastenings: stretch cuffs and waistband and check recovery; operate zips and throat buttons, inspect pocket reinforcement and look for sharp edges.
Labels and packing: match fibre labels to the agreed materials, check size labels and carton assortment, and inspect arrivals for dampness or mould. Use the quality inspection guide to define the inspection scope.
Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us
What goes wrong
A Harrington can match the sample colour yet lose its shape because the waistband rib is too loose or the shell and lining shrink differently. A tight lining pulls at the armholes, a stiff collar stands awkwardly, and uneven zip insertion makes the front ripple. Compare washed production garments with the approved sample before accepting the batch.
Check lining can bleed onto a pale shell or show mismatched patterns at openings. Pocket flaps can curl and zip sliders can catch the lining. Record these defects by size and colour on arrival, retain affected samples and agree the remedy with the supplier before replenishing stock.
Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For own-brand ranges, see sourcing for brands.
Frequently asked questions
What is the UK import duty on men's Harrington jackets from China?
The selected woven Harrington lines carry 12% duty for goods from China, with no listed anti-dumping or countervailing duty and no listed suspension.
Which commodity code covers a cotton Harrington jacket?
For a non-batik cotton wind-jacket, candidate codes are 6201 30 10 99 up to 1 kg and 6201 30 90 99 above 1 kg. Confirm the construction, outer fabric and finished weight.
Do Harrington jackets need fibre labels?
Yes. Fibre composition labelling applies in Great Britain. Match the label to the actual materials and agree the artwork before production.
How do I check Harrington jacket quality?
Measure the fit, inspect collar and zip alignment, test rib recovery and wash finished samples. Check shell-to-lining colour transfer, pocket reinforcement and lining freedom at the armholes.