Sector guides

Sourcing gas-fired cremation furnaces from China

Gas-fired cremation furnaces and qualifying furnace parts from China carry 0% UK duty, with no anti-dumping or countervailing duty recorded. Confirm the applicable machinery safety requirements and the operator's site environmental permitting responsibilities with the relevant authorities. Cambridge China Bridge sources gas-fired cremation furnaces.

Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for small orders and first imports

Written by Bono Xu, Founder, Cambridge China Bridge · 4 min read · Updated 2026-11-21

Illustrative studio view of gas-fired cremation furnaces, showing the product's external form and material on a pale grey surface.
Illustrative image

Zero duty on gas-fired cremation furnaces

Read from the UK Trade Tariff on 2 October 2026, heading 8417 covers non-electric industrial or laboratory furnaces and ovens, including incinerators. Gas-fired cremation furnaces fall within the broad other-furnaces line, 8417 80 70 00. The complete-furnace variants listed share that line; they are not separate tariff subdivisions.

The supplied tariff data records 0% duty for goods from China on complete furnaces and parts under 8417 90 00 00. It records no anti-dumping or countervailing duty, suspensions or attached import controls. Import VAT is separate from customs duty. The import duty and VAT guide explains the calculation.

Confirm the commodity code from the furnace drawings, heating method and shipment contents. Do not automatically classify separately supplied burners or other equipment as furnace parts. For the wider product family, see non-electric waste incinerators.

UK duty on these lines for goods of Chinese origin (one code per row), read from the UK Trade Tariff on 2 October 2026.
GoodsCommodity codeDutyAnti-dumping or countervailing duty on China
Natural-gas-fired cremation furnaces8417 80 70 000%None
Parts identifiable as non-electric cremation furnace parts8417 90 00 000%None

Specify the cremator and its site interfaces

This guide concerns furnaces for human cremation. Specify the intended fuel and supply pressure, coffin loading envelope, loading mechanism, primary and secondary chambers, refractory materials, ash removal, induced draught, controls and service access. Define who supplies the flue gas cooling, mercury abatement, filtration, ductwork and chimney interfaces.

Confirm with the relevant authority how the Supply of Machinery (Safety) Regulations 2008 apply to furnace machinery supplied to the intended market, including any requirements for a declaration of conformity, marking and instructions in English. Confirm the site's environmental permitting requirements and the operator's responsibilities with the relevant environmental authority. Agree the emissions specification and commissioning responsibilities with the operator before ordering.

Official guidance says replacement cremators, other than temporary cremators, must be designed to meet the standards for new crematoria. It also calls for secondary-chamber gas residence time to be calculated at design stage and verified at commissioning. Ask for the calculation and an agreed verification method, rather than relying on a maximum-temperature claim.

Worked duty example

Illustrative example, not a quote: Illustrative order: one gas-fired cremation furnace under 8417 80 70 00, invoiced at £72,000 free on board, with £6,500 of freight and insurance to the UK. The customs value is £78,500. Duty at 0% is £0. Import VAT at 20% is charged on the customs value plus duty, £78,500, so it is £15,700. With no duty, the only import tax is the VAT, which a VAT-registered importer can usually reclaim. The import duty and VAT guide explains each step.

Inspection checklist

Combustion controls: witness flame-failure shutdown, purge sequences, emergency stops and loading interlocks against the agreed control specification. Match the gas train and burner settings to the intended fuel.

Chambers and lining: compare chamber geometry, refractory materials and insulation with approved drawings. Inspect door seals, casing welds and accessible lining surfaces before shipment and again on arrival.

Performance: record chamber temperatures, oxygen, carbon monoxide and draught during an agreed factory firing test. Keep factory test acceptance and site commissioning acceptance separate.

Documents and delivery: match the declaration, safety marking, English instructions, wiring diagrams and spares list to the delivered model. Check sensors, duct connections and refractory for transport damage. Use the inspection guide to plan checks.

Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us

What goes wrong

A hot furnace can still have inadequate gas residence time, unstable draught or poorly positioned sensors. Cracked lining, leaking doors and fuel settings that do not match the site supply can undermine the agreed performance. Define test conditions and acceptance records before manufacture.

Another problem is an incomplete supply boundary: the furnace arrives, but cooling, filtration, monitoring connections or commissioning support are missing. Put each interface and responsibility into the purchase specification, and check access for future lining replacement and maintenance.

Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For machinery and equipment, see machinery imports.

Frequently asked questions

What is the UK import duty on gas-fired cremation furnaces from China?

The supplied tariff data records 0% on 8417 80 70 00 and furnace parts under 8417 90 00 00, with no anti-dumping or countervailing duty. Import VAT is separate.

Does the imported furnace need an environmental permit?

Agree the furnace, emissions treatment and commissioning specification with the operator before ordering.

Can a replacement cremator use an older design specification?

Official guidance says replacement cremators, other than temporary cremators, must be designed to meet the standards specified for new crematoria.

Is a factory firing test enough to accept the cremator?

Agree separate factory and site acceptance records. Official guidance calls for secondary-chamber gas residence time to be calculated at design stage and verified at commissioning.

Sources

  1. UK Trade Tariff — commodity codes and duty
  2. Supply of Machinery (Safety) Regulations 2008
  3. Crematoria technical guidance: Who it’s for and how to use it
  4. Crematoria: emissions limits, monitoring and other provisions

Monthly email

What changed for UK buyers from China, and when to act

One email at the start of each month. Every figure has an official source.

One email a month. Unsubscribe with one click. Privacy

Discuss your sourcing project

Tell us the product, quantity and destination. Our own staff in China verify factories, follow production and inspect before shipment. We reply the same working day to confirm receipt and arrange next steps.

Discuss your sourcing project
Get a quote