Sourcing electric hand mixers from China
Domestic electric hand mixers from China carry 2% UK duty under 8509 40 00 00, with no listed trade remedies. For mains models sold in Great Britain, electrical safety rules apply: match the motor, cable, plug and controls to the tested configuration. Cambridge China Bridge sources electric hand mixers.
UK duty on electric hand mixers
Heading 8509 covers domestic electromechanical appliances with a self-contained electric motor, excluding vacuum cleaners. Complete domestic electric hand mixers sit within the food grinders and mixers line. The table shows hand-mixer configurations sharing that commodity code, rather than separate tariff subdivisions.
Read from the UK Trade Tariff on 29 September 2026, code 8509 40 00 00 carried 2% duty for goods from China. The supplied tariff record lists no anti-dumping or countervailing duty, suspension or import control for this line. These findings concern complete domestic hand mixers.
Confirm the commodity code using the model's function, domestic use and supplied attachments. For the wider product family, see domestic food processors.
| Goods | Commodity code | Duty | Anti-dumping or countervailing duty on China |
|---|---|---|---|
| Domestic electric hand mixers with beaters | 8509 40 00 00 | 2% | None |
Specify the mixer and its attachments
Specify mains supply, motor and thermal protection, speed control, turbo operation, cable, UK plug and housing material. Define the beater and dough-hook materials, shaft dimensions, locking arrangement and cleaning instructions. Agree the intended mixtures, maximum load and operating cycle with the factory, then test the approved sample under those conditions.
Confirm with the relevant authority or your compliance adviser how the Electrical Equipment (Safety) Regulations 2016 apply to your mains model and which technical documentation, declaration of conformity and CE or UKCA marking are needed. Check the applicable documents, marking and importer details against the actual model. Instructions must be in easily understandable English. Equipment liable to generate electromagnetic disturbance is also covered by the electromagnetic compatibility rules, subject to their exceptions.
Include hazardous-substance compliance in the document review and ask for material and food-contact test evidence for beaters and dough hooks. For UK resale, confirm with the relevant environmental regulator whether your electrical-equipment importing business is a producer under the waste electrical equipment rules; producers must register annually. Arrange testing and certification before approving bulk production.
Worked duty example
Illustrative example, not a quote: Illustrative order: 1,000 domestic electric hand mixers; illustrative whole-pound FOB value and freight under 8509 40 00 00, invoiced at £12,000 free on board, with £600 of freight and insurance to the UK. The customs value is £12,600. Duty at 2% is £252. Import VAT at 20% is charged on the customs value plus duty, £12,852, so it is £2,570.40. Import taxes total £2,822.40; a VAT-registered importer can usually reclaim the VAT, so the lasting cost is the £252 of duty. The import duty and VAT guide explains each step.
Inspection checklist
Configuration: compare sampled units with the approved motor, thermal protection, switch, cable and plug list; match the model to its reports.
Attachments: check shaft straightness, secure engagement, release operation, sharp edges and surface finish; confirm dough hooks fit their intended sockets.
Loaded operation: run agreed mixtures through the specified operating cycle; check speed changes, vibration, unusual noise, heat and signs of lubricant reaching food-contact parts.
Arrival condition: check housings, accessory counts, storage clips and transit damage; compare rating labels, importer details and English instructions with the approved artwork.
What goes wrong
An unloaded demonstration can miss weak performance in thick mixtures. Loose attachment sockets, bent shafts and poorly matched gears can produce wobble or rattling. Turn these into sample acceptance checks rather than relying on rated power alone.
A substituted motor, thermal protector or cable can leave the shipment different from the tested configuration. Require written approval before component changes and inspect bulk units against the agreed list. Keep dough-hook claims within the loads and operating cycles actually demonstrated by the sample.
Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification.
Frequently asked questions
What is the UK import duty on electric hand mixers from China?
Complete domestic electric hand mixers under 8509 40 00 00 carried 2% duty in the supplied tariff record, with no listed anti-dumping or countervailing duty.
What documents should I ask the hand-mixer factory for?
Ask for the exact model's safety reports, technical documentation, declaration of conformity, approved component list and attachment material evidence. Compare them with the production specification.
Can I sell a Chinese hand mixer with a translated manual?
The importer must ensure instructions are in easily understandable English. Check that the translation describes the supplied controls, attachment fitting, cleaning and operating limits.
How do I check whether the dough hooks work?
Agree the dough type, load and operating cycle before sampling. Test hook engagement, mixing performance, heat and vibration under those conditions; keep the demonstrated limits in the specification.