Sourcing copper earthing plates from China
Copper earthing plates classified under heading 7419 carry 0% UK duty from China across the supplied tariff lines. For workplace installations, joints and connections must be mechanically and electrically suitable where necessary to prevent danger. Cambridge China Bridge sources copper earthing plates.
Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for small orders and first imports

Copper earthing plates: 0% duty
Read from the UK Trade Tariff on 30 September 2026, heading 7419 covers other articles of copper. Every supplied line carries 0% duty for goods from China, with no anti-dumping or countervailing duty, suspensions or attached import controls recorded in the supplied tariff extract.
The table shows potentially relevant processing categories. It does not establish that every plate belongs under each code. Distinguish a finished earthing electrode from plain copper sheet, and tell your broker whether the plate is cast, stamped, drilled or otherwise worked. Confirm the commodity code using its drawing and manufacturing description.
For related electrodes and the wider heading, see solid copper earth rods. Plain sheet is covered in the copper sheet guide.
| Goods | Commodity code | Duty | Anti-dumping or countervailing duty on China |
|---|---|---|---|
| Hand-made copper articles, cast or stamped, not further worked | 7419 20 00 10 | 0% | None |
| Other copper articles, cast or stamped, not further worked | 7419 20 00 90 | 0% | None |
| Other hand-made copper articles | 7419 80 90 10 | 0% | None |
| Other copper articles, including further-worked articles | 7419 80 90 98 | 0% | None |
Specify the plate and its conductor connection
Specify solid copper or copper-coated material explicitly, together with the copper grade, conductivity acceptance criteria, length, width, thickness tolerance and flatness. Define hole diameter and position, edge condition, conductor size, connector material and whether bolts, clamps or connecting tails are included. Ask for material certificates tied to the production batch.
For workplace installations, HSE guidance states that joints and connections must be mechanically and electrically suitable where necessary to prevent danger. Agree the connection inspection and test method with the installation designer before ordering. Before sale, confirm the product safety obligations applicable to the intended use.
Worked duty example
Illustrative example, not a quote: Illustrative batch of drilled solid copper earthing plates under 7419 80 90 98, invoiced at £20,000 free on board, with £800 of freight and insurance to the UK. The customs value is £20,800. Duty at 0% is £0. Import VAT at 20% is charged on the customs value plus duty, £20,800, so it is £4,160. With no duty, the only import tax is the VAT, which a VAT-registered importer can usually reclaim. The import duty and VAT guide explains each step.
Inspection checklist
Material: match batch certificates to the delivered plates and arrange composition and conductivity checks against the agreed specification. Surface colour alone does not establish solid copper construction.
Dimensions: measure thickness across the plate, check flatness and hole positions, and compare plate mass with the approved drawing.
Connection: trial-fit the specified conductor and connector. Check contact surfaces, thread engagement, supplied hardware and the agreed connection test results.
Packing: check for bent corners, deep scratches, burrs and moisture damage. Keep batch identification with each pack. Use the inspection guide to brief the inspector.
Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us
What goes wrong
Problems include copper-coated steel supplied against a solid copper specification, thin plates, misplaced holes and connectors that fit the bolt but not the conductor. A material certificate without a matching batch reference leaves the delivered material unverified.
A factory conductivity result does not establish the resistance of the installed earthing system. Soil conditions, layout and connections affect the result. Arrange site verification separately; HSE says inspection and testing of fixed wiring installations should normally be carried out by a competent person, usually an electrician.
Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For repeat volumes, see container programmes.
Frequently asked questions
What is the UK import duty on copper earthing plates from China?
The supplied tariff extract shows 0% duty on every line under heading 7419, with no anti-dumping or countervailing duty. Confirm that the finished plate belongs under this heading.
How do I check that an earthing plate is solid copper?
Specify solid copper, obtain batch-linked material evidence and agree composition and conductivity testing. Do not accept surface colour as proof of the material beneath it.
Does every copper plate use the same commodity code?
No. Plain sheet and finished articles need separate classification checks. Give your broker the drawing, intended use and manufacturing operations.
Can a factory test prove the installed earth resistance?
No. Plate testing checks the supplied product. The installed system also depends on soil, layout and connections, so arrange verification at the installation.