Sector guides

Sourcing cine pressure plates from China

Cine camera film pressure plates from China carry 0% UK duty under the camera-parts line, with no trade remedy recorded. If intended or likely to be used by consumers in Great Britain, they must meet applicable consumer product safety requirements. Cambridge China Bridge sources cine camera film pressure plates.

Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for small orders and first imports

Written by Bono Xu, Founder, Cambridge China Bridge · 4 min read · Updated 2026-11-15

Illustration of two flat polished metal cinema camera film pressure plates with sprung mounting tabs and shallow relief channels.
Illustrative image

0% duty on cine camera film pressure plates

Heading 9007 covers cinematographic cameras and projectors and their parts and accessories. For pressure plates identifiable as cine camera parts, the relevant line is 9007 91 00 00. The table shows alternative supplies within that same line. See the cine camera film gates guide for the wider assembly.

Read from the UK Trade Tariff on 11 October 2026, the supplied lines carried 0% duty for goods from China, with no anti-dumping or countervailing measure and no suspension recorded. The tariff attaches a cultural-goods export licence control. GOV.UK states that cultural goods have no import licensing requirement in Great Britain. Ask your customs broker to confirm how the listed control affects your shipment.

Confirm the commodity code using the camera model, drawings and description of what is supplied. Describe a bare plate separately from a complete gate assembly. Import VAT is separate from customs duty; see the import duty and VAT guide.

UK duty on these lines for goods of Chinese origin (one code per row), read from the UK Trade Tariff on 11 October 2026.
GoodsCommodity codeDutyAnti-dumping or countervailing duty on China
Replacement film pressure plates for cine cameras9007 91 00 000%None

Specify the film-contact face and camera fit

Specify the camera make, model and revision, film gauge, plate outline, thickness, mounting positions and contact-face geometry. Provide a drawing and an approved sample. State the material, surface finish, edge treatment and whether springs, hinges or mounting hardware are included.

Agree how flatness, spring loading, travel and clearance will be measured in the assembled camera. Require a film transport trial with the intended gate and representative film. If the plates are intended or likely to be used by consumers in Great Britain, general product safety rules apply and the products supplied must be safe.

Worked duty example

Illustrative example, not a quote: Illustrative order, not a quotation: 20 bespoke cine camera film pressure plate assemblies under 9007 91 00 00, invoiced at £10,000 free on board, with £900 of freight and insurance to the UK. The customs value is £10,900. Duty at 0% is £0. Import VAT at 20% is charged on the customs value plus duty, £10,900, so it is £2,180. With no duty, the only import tax is the VAT, which a VAT-registered importer can usually reclaim. The import duty and VAT guide explains each step.

Inspection checklist

Fit: check mounting positions, plate seating, latch engagement and clearance against the approved camera and drawing.

Contact face: inspect for burrs, machining marks, embedded grit and coating damage; check the agreed flatness and finish.

Film transport: run sacrificial test film through the assembled camera, then inspect for scratches, drag and inconsistent seating.

Arrival condition: check for distortion, corrosion and loose springs; keep contact faces separated in protective packing. Use the quality inspection guide to brief the inspector.

Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us

What goes wrong

A plate can match the outline yet fail because its seating height, mounting position or spring loading differs from the original. Burrs and trapped grit can scratch film; uneven contact can leave film poorly seated. A polished appearance does not establish correct geometry.

Approve the assembled fit and film trial before accepting production. Record the approved drawing revision and reject substitutions to the contact finish or spring arrangement without checking them. On arrival, repeat the fit and transport checks before installing the plates in working cameras.

Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For components and parts, see sourcing for manufacturers.

Frequently asked questions

What is the UK import duty on cine camera pressure plates from China?

The supplied tariff data, read on 11 October 2026, gives 0% duty for camera parts under 9007 91 00 00, with no anti-dumping or countervailing measure recorded.

Which commodity code covers cine camera film pressure plates?

For plates identifiable as cine camera parts, start with 9007 91 00 00. Confirm the classification against the drawings, intended camera and whether the shipment contains bare plates or assemblies.

Will a pressure plate fit any camera using the same film gauge?

Do not assume so. Check the camera model and revision, mounting positions, seating height, contact geometry, spring loading and clearance against an approved sample.

How do I check that a pressure plate will not scratch film?

Inspect the contact face and edges, clean the assembly and run sacrificial film in the intended camera. Inspect the transported film for scratches and check for drag or uneven seating.

Sources

  1. UK Trade Tariff — commodity codes and duty
  2. General Product Safety Regulations: Great Britain guidance
  3. Product safety advice for businesses
  4. Exporting or importing objects of cultural interest

Monthly email

What changed for UK buyers from China, and when to act

One email at the start of each month. Every figure has an official source.

One email a month. Unsubscribe with one click. Privacy

Discuss your sourcing project

Tell us the product, quantity and destination. Our own staff in China verify factories, follow production and inspect before shipment. We reply the same working day to confirm receipt and arrange next steps.

Discuss your sourcing project
Quote for cine pressure plates