Sourcing transformer bushings from China
Transformer insulating bushing bodies classified under heading 8546 carry 0% UK duty across all materials from China. Confirm the classification of the supplied assembly: insulating fittings with metal parts moulded in may fall under heading 8547. Cambridge China Bridge sources transformer insulating bushings.
Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for small orders and first imports

Duty on transformer bushing insulating bodies
Heading 8546 covers electrical insulators of any material. For transformer bushings, the table concerns insulating bodies classified by material, rather than assuming every complete bushing belongs here. The ceramics line includes porcelain; the other-material line should only be used after checking the actual construction.
Read from the UK Trade Tariff on 1 October 2026, all listed lines carried 0% duty for goods from China. The supplied tariff data records no anti-dumping or countervailing duty, suspensions or attached import controls. Import VAT is normally 20%; see UK import duty and VAT.
Insulating fittings for electrical machines, including bushings with metal parts moulded in, are classified separately under heading 8547. Give your customs broker the drawing, material breakdown and description of what is shipped, then confirm the commodity code. For the wider heading, see porcelain station post insulators.
| Goods | Commodity code | Duty | Anti-dumping or countervailing duty on China |
|---|---|---|---|
| Glass insulating bodies for transformer bushings | 8546 10 00 00 | 0% | None |
| Porcelain insulating bodies for transformer bushings | 8546 20 00 00 | 0% | None |
| Plastic insulating bodies for transformer bushings | 8546 90 10 00 | 0% | None |
| Other-material insulating bodies for transformer bushings | 8546 90 90 00 | 0% | None |
Specify the bushing interface and insulation
State whether you need a bare insulating body or an assembly with conductor, flange and seals. Specify the insulation material, transformer connection, rated voltage and current where relevant, indoor or outdoor use, creepage distance, mounting dimensions and sealing faces. For oil-contact applications, agree compatibility of the insulation and seals with the intended fluid.
Agree the electrical and mechanical acceptance tests with the transformer designer. Match reports to the supplied design, material and drawing revision. Ask a compliance adviser whether the Electrical Equipment (Safety) Regulations 2016 apply to the supplied product; where they apply, the importer must ensure that instructions are in easily understandable English. Use testing and certification to organise the evidence.
Worked duty example
Illustrative example, not a quote: Illustrative order of 600 small porcelain transformer bushing bodies under 8546 20 00 00, invoiced at £12,000 free on board, with £600 of freight and insurance to the UK. The customs value is £12,600. Duty at 0% is £0. Import VAT at 20% is charged on the customs value plus duty, £12,600, so it is £2,520. With no duty, the only import tax is the VAT, which a VAT-registered importer can usually reclaim. The import duty and VAT guide explains each step.
Inspection checklist
Fit: compare overall length, bore, mounting interface and sealing faces with the approved drawing; trial-fit a sample to the intended transformer interface.
Insulation: inspect porcelain glaze and sheds for chips, cracks and crazing, and polymer surfaces for voids, flash or damage. Match measured creepage distance to the agreed design.
Tests and traceability: match batch identification to reports and packing records. For assembled bushings, check agreed dielectric and leak-test results against the supplied design.
Packing and arrival: check that supports protect the body without loading the sheds, and record transit damage before installation. The importer or packing provider must ensure solid wood packaging meets the applicable requirements.
Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us
What goes wrong
A visually similar replacement can have the wrong mounting interface or sealing face. Porcelain cracks may escape a visual check, while damaged sheds reduce the intended surface path. Poorly matched seals or uneven seating can cause leakage in oil-contact assemblies. Require drawing approval and an agreed test plan before production.
Reports sometimes describe a different material or bushing design from the shipment. Keep the approved drawing, sample and batch records together, and compare the delivered goods before releasing them for installation. A station post insulator report should not be accepted as evidence for a transformer bushing without checking its relevance.
Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For components and parts, see sourcing for manufacturers.
Frequently asked questions
What is the UK import duty on transformer bushings from China?
Insulating bodies correctly classified under heading 8546 carry 0% duty across the listed materials, with no trade remedies recorded in the supplied tariff data. Complete assemblies need classification checked separately.
Are complete transformer bushings always under 8546?
No. Insulating fittings with metal parts moulded in may fall under heading 8547. Have your broker check the actual assembly, drawing and material breakdown.
What should I send a Chinese bushing factory?
Send the approved interface drawing, insulation material, electrical ratings, service conditions, sealing requirements and acceptance test plan. State clearly whether the order is for bodies or complete assemblies.
What should I check when transformer bushings arrive?
Check transit damage, cracks and chipped sheds, mounting fit, sealing faces and batch identity. Compare the goods and test records with the approved design before installation.