Sector guides

Sourcing steel hand needle threaders from China

Steel hand-needle threaders from China carry a flat 2% UK duty under the relevant other-articles line. Consumer threaders sold in Great Britain must be safe in normal or reasonably foreseeable use. Specify needle-eye fit and wire attachment before approving samples. Cambridge China Bridge sources steel hand-needle threaders.

Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for small orders and first imports

Written by Bono Xu, Founder, Cambridge China Bridge · 4 min read · Updated 2026-11-21

Illustrative studio view of steel hand needle threaders, showing the product's external form and material on a pale grey surface.
Illustrative image

UK duty on steel hand-needle threaders

Read from the UK Trade Tariff on 30 September 2026, heading 7319 covers iron or steel hand-use needles, bodkins, crochet hooks and similar articles, plus safety pins and other pins. For steel hand-needle threaders, the relevant other-articles line is 7319 90 90 00. The table presents threader formats sharing that line.

The supplied record lists 2% duty for goods from China, with no anti-dumping or countervailing duty, steel measure, suspension or attached import control. This is the tariff position on the read date; check the position again before shipment.

Confirm the commodity code using the actual material, construction and hand-use function, especially for mixed-material assemblies or sewing kits. For related products within the wider heading, see the steel sewing bodkins guide.

UK duty on these lines for goods of Chinese origin (one code per row), read from the UK Trade Tariff on 30 September 2026.
GoodsCommodity codeDutyAnti-dumping or countervailing duty on China
Steel wire-loop hand-needle threaders7319 90 90 002%None

Specify needle-eye fit and wire attachment

Specify the steel grade, wire diameter, loop shape, hook profile where applicable, grip material, overall dimensions and surface finish. Supply representative hand needles and thread so the factory can demonstrate that the threader enters the eye and draws the intended thread back through without forcing it.

Agree how the wire is secured to the grip and how attachment strength will be checked. Approve a working sample, drawing, pack contents and artwork. Consumer threaders sold in Great Britain must be safe in normal or reasonably foreseeable use under the General Product Safety Regulations 2005. Assess exposed wire ends, sharp stamped edges and detached parts.

Worked duty example

Illustrative example, not a quote: Illustrative order of retail packs of steel wire-loop hand-needle threaders for a haberdashery business under 7319 90 90 00, invoiced at £16,000 free on board, with £1,200 of freight and insurance to the UK. The customs value is £17,200. Duty at 2% is £344. Import VAT at 20% is charged on the customs value plus duty, £17,544, so it is £3,508.80. Import taxes total £3,852.80; a VAT-registered importer can usually reclaim the VAT, so the lasting cost is the £344 of duty. The import duty and VAT guide explains each step.

Inspection checklist

Fit and function: pass sampled threaders through the agreed needle eyes, load the intended thread and draw it back through. Check for snagging, crushed loops and thread damage.

Attachment: repeat the agreed threading test and check that wire ends stay secured in the grip. Look for movement, loose crimps and fracture near the attachment.

Finish: inspect loops, hooks and stamped grips under magnification for burrs, rust, flaking plating and sharp edges.

Packing and identification: count the contents and check that fine wires are protected from crushing. Confirm with the relevant product safety authority what producer name and address, product reference or batch identification should appear on the product or packaging. Compare these with approved artwork and use the quality inspection guide.

Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us

What goes wrong

A loop may pass through an empty needle eye but jam when folded around the intended thread. Thick wire, an oversized loop or a rough joint can make a threader unusable with fine needles. Approve samples with the actual needle and thread combination, rather than checking appearance alone.

Wire can pull out of the grip, kink during packing or break beside the attachment. Stamped grips can retain sharp edges, and plating can flake or rust. Compare unpacked production samples with the approved sample, then repeat the functional check on samples taken from finished retail packs.

Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For repeat volumes, see container programmes.

Frequently asked questions

What is the UK import duty on steel needle threaders from China?

The relevant line, 7319 90 90 00, carries 2% duty in the supplied tariff record. It lists no anti-dumping or countervailing duty, steel measure, suspension or import control.

How do I check that a threader fits fine hand needles?

Test with the intended needles and thread. The loop must enter the eye and return with the thread loaded, without forcing, snagging or permanently bending.

What safety rules apply to retail needle threaders?

Assess sharp edges, exposed wire ends and detached parts.

How can I check whether the wire will pull out?

Agree an attachment test with the factory and repeat threading with the approved needle and thread. Inspect for movement at the grip, loose crimps and cracks where the wire enters the attachment.

Sources

  1. UK Trade Tariff — commodity codes and duty
  2. General product safety regulations: Great Britain
  3. General Product Safety Regulations 2005: Great Britain

Monthly email

What changed for UK buyers from China, and when to act

One email at the start of each month. Every figure has an official source.

One email a month. Unsubscribe with one click. Privacy

Discuss your sourcing project

Tell us the product, quantity and destination. Our own staff in China verify factories, follow production and inspect before shipment. We reply the same working day to confirm receipt and arrange next steps.

Discuss your sourcing project
Get a quote