Sourcing steel bicycle parking stands from China
Steel bicycle parking stands within heading 7326 carry 2% UK duty from China across the relevant lines, with no anti-dumping or countervailing duty shown. Consumer-use stands must be safe before being placed on the Great Britain market. Specify the fixing method and corrosion protection before ordering. Cambridge China Bridge sources steel bicycle parking stands.
Duty on finished stands and separate components
Read from the UK Trade Tariff on 8 October 2026, heading 7326 covers other articles of iron or steel. Other fabricated steel articles are listed under 7326 90 98 90. The table distinguishes finished stands, wire articles and separately imported forged components; these are classification candidates, not interchangeable codes for the same finished stand.
The selected lines carry 2% duty for goods from China, with no anti-dumping duty, countervailing duty or steel trade measure shown. Product-specific suspensions appear on the forged lines, but their descriptions do not cover bicycle stand components. The finished-article line carries a torture-goods import prohibition and an export restriction. The official import notice concerns specified torture equipment; ask your customs broker to confirm the declaration requirements for an ordinary stand.
Confirm the commodity code using drawings, material and manufacturing details. Ask your customs broker to confirm whether and when UK carbon border adjustment mechanism requirements apply to your goods under heading 7326, using the published UK carbon border guide as a starting point. For the wider heading, see steel security bollards.
| Goods | Commodity code | Duty | Anti-dumping or countervailing duty on China |
|---|---|---|---|
| Other steel articles, including fabricated bicycle parking stands | 7326 90 98 90 | 2% | None |
| Other steel wire articles, for wire-form bicycle parking racks | 7326 20 00 90 | 2% | None |
| Other open-die forged steel articles, for separately imported stand components | 7326 90 92 90 | 2% | None |
| Other closed-die forged steel articles, for separately imported stand components | 7326 90 94 90 | 2% | None |
Specify bicycle support, anchors and outdoor finish
State whether the stand supports the bicycle frame or holds a wheel, and whether it is surface-mounted or embedded. Supply drawings showing tube section, wall thickness, bends, overall dimensions, base plates, hole positions and clearances. Trial the sample with the bicycles and locks your customers use, checking that the frame can be secured without damaging cables, spokes or brake discs.
Specify steel grade, weld details, galvanising or coating system, colour and treatment of cut ends. Agree how hollow sections drain and how exposed edges are finished. Match anchors to the intended substrate and obtain installation instructions. Keep an approved sample and drawing revision for quality inspection.
For stands intended or reasonably likely to be used by consumers in Great Britain, general product safety rules apply. Producers, including importers, must ensure the product is safe before placing it on that market. Assess sharp edges, instability, snagging and foreseeable misuse against the actual installation.
Worked duty example
Illustrative example, not a quote: 50 steel bicycle parking stands, illustrative order under 7326 90 98 90, invoiced at £5,000 free on board, with £700 of freight and insurance to the UK. The customs value is £5,700. Duty at 2% is £114. Import VAT at 20% is charged on the customs value plus duty, £5,814, so it is £1,162.80. Import taxes total £1,276.80; a VAT-registered importer can usually reclaim the VAT, so the lasting cost is the £114 of duty. The import duty and VAT guide explains each step.
Inspection checklist
Dimensions: measure tube walls, stand spacing, base-plate flatness and fixing-hole positions against the approved drawing; trial-fit the supplied hardware.
Welds and edges: inspect joints for cracks, incomplete welds and distortion; check cut ends, caps and exposed surfaces for burrs.
Finish: measure coating thickness against the agreed specification; inspect bends, welds and underside surfaces for bare areas, peeling and transport damage.
Function and packing: assemble a sample, park and lock representative bicycles, check stability, and confirm that fixings and instructions match the order.
Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us
What goes wrong
A wheel slot that looks suitable in a drawing can clash with a brake disc or fail to support a loaded bicycle. Thin tube walls, distorted base plates and misplaced anchor holes make installation difficult. Approve a physical trial assembly before bulk production and inspect the same details before dispatch.
Corrosion starts at poorly covered welds, cut ends and trapped-water points. Stands packed without separators arrive with scratched finishes. Agree drainage details, surface protection and packing, then check them again on arrival before installation.
Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For repeat volumes, see container programmes.
Frequently asked questions
What is the UK import duty on steel bicycle parking stands from China?
The relevant heading 7326 lines carry 2% duty in the supplied tariff snapshot, with no anti-dumping or countervailing duty shown. Confirm the finished stand's commodity code.
Which commodity code covers a fabricated steel bicycle stand?
7326 90 98 90 is the other-articles candidate within this heading. Give your customs broker drawings and manufacturing details; wire articles and separately imported forged components have different lines.
What should I specify for outdoor bicycle stands?
Specify tube wall thickness, weld details, corrosion protection, drainage, base plates and anchors. Approve a sample with the intended bicycles, locks and installation substrate.
What safety rule applies to bicycle parking stands?
For stands intended or reasonably likely to be used by consumers in Great Britain, general product safety rules require producers, including importers, to ensure safety before placing them on the market.