Sourcing replacement safety razor heads from China
Blade-free replacement safety razor heads from China carry a flat 2% UK duty under the razor-parts line. Consumer products supplied in Great Britain must be safe. Specify the handle thread, cap and baseplate geometry, then check blade alignment on assembled samples. Cambridge China Bridge sources replacement safety razor heads.
Duty on replacement safety razor heads
Read from the UK Trade Tariff on 5 October 2026, heading 8212 covers razors, razor blades and their parts. This guide covers blade-free replacement heads, top caps and baseplates for reusable safety razors under 8212 90 00 00. The table shows product variants sharing the parts code, rather than separate tariff subdivisions.
The parts line carries 2% duty for goods from China. The supplied record lists no anti-dumping or countervailing duties, suspensions or attached import controls for this line.
Confirm what the shipment contains, including whether blades or a complete razor are supplied, using the commodity code guide. See the wider razors and razor blades guide for the other lines in this heading.
| Goods | Commodity code | Duty | Anti-dumping or countervailing duty on China |
|---|---|---|---|
| Blade-free replacement safety razor heads with closed comb | 8212 90 00 00 | 2% | None |
Specify the thread, cap and blade seating
State whether you need an assembled head, a top cap or a baseplate. Supply drawings for the handle thread, threaded post, locating features, cap curvature and guard profile. Name the intended handle and blade format, and send physical samples for fit checks. Agree the material, surface finish and acceptance tolerances.
Specify blade gap, exposure and alignment with the intended blade clamped in place. Agree how to check these against the approved sample. Include drainage, cleaning access, edge smoothness and resistance to corrosion in the inspection brief.
Consumer products supplied in Great Britain must be safe. Confirm with the relevant authority whether the UK importer's name and address must appear on the product or packaging, and check the existing razor guide when preparing the pack. Agree fitting and blade-changing instructions, and check that the pack protects the finish and threaded post.
Worked duty example
Illustrative example, not a quote: Illustrative opening stock order of blade-free replacement safety razor heads for a specialist retailer under 8212 90 00 00, invoiced at £9,000 free on board, with £800 of freight and insurance to the UK. The customs value is £9,800. Duty at 2% is £196. Import VAT at 20% is charged on the customs value plus duty, £9,996, so it is £1,999.20. Import taxes total £2,195.20; a VAT-registered importer can usually reclaim the VAT, so the lasting cost is the £196 of duty. The import duty and VAT guide explains each step.
Inspection checklist
Fit: assemble sampled heads on the intended handle; check thread engagement, secure tightening and blade clamping without movement.
Geometry: compare the cap, locating features and baseplate with the drawing; check blade seating, exposure and alignment along the cutting edges.
Finish: inspect comb teeth, guards and corners for burrs; check plating coverage, peeling and corrosion against the agreed sample and test plan.
Arrival condition: check for bent posts, distorted plates and transit damage; verify importer details, product identification and fitting instructions. Agree sampling through the inspection guide.
Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us
What goes wrong
A head can screw onto a handle yet clamp the blade unevenly. Mismatched caps and baseplates, distorted locating features or uneven seating can change blade exposure. Check the assembled head with the intended blade and handle, rather than accepting separate component measurements alone.
Burrs on comb teeth can scratch skin, while weak threads loosen or strip during blade changes. Thin or poorly bonded plating can peel and expose the underlying metal to corrosion. Keep the approved assembly as the comparison sample and assess damaged arrivals before releasing them for sale.
Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For repeat volumes, see container programmes.
Frequently asked questions
What is the UK import duty on replacement safety razor heads from China?
Blade-free replacement heads and their parts under 8212 90 00 00 carry 2% duty. The supplied tariff record lists no anti-dumping or countervailing duties for this line.
Which commodity code covers replacement safety razor heads?
Blade-free heads, caps and baseplates are covered here as other razor parts under 8212 90 00 00. Confirm classification separately if the shipment includes blades or complete razors.
Will a replacement safety razor head fit my existing handle?
Check the thread, post length and mating surfaces against drawings and physical samples. Assemble the head with the intended handle and blade to confirm secure clamping and alignment.
What should I check before accepting a batch of razor heads?
Check assembled fit, blade seating and exposure, smooth guards and comb teeth, plating adhesion and corrosion. Inspect packaging for bent posts or distorted plates and compare with the approved sample.