Sourcing mouldboard ploughs from China
Mouldboard ploughs and their parts from China carry 0% UK import duty under heading 8432. Confirm the applicable machinery safety rules, declaration of conformity and CE or UKCA marking with the relevant authority or your customs broker. Specify the tractor linkage, working width and wear parts before ordering. Cambridge China Bridge sources mouldboard ploughs.
Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for small orders and first imports

Zero duty on ploughs and their parts
Read from the UK Trade Tariff on 1 October 2026, mouldboard ploughs fall within the ploughs line 8432 10 00 00, carrying 0% duty for goods from China. The supplied tariff data records no anti-dumping or countervailing duty, suspension or attached import control for this line or the parts line.
Heading 8432 covers agricultural, horticultural and forestry machinery for soil preparation or cultivation, plus lawn and sports-ground rollers. Plough parts are listed under 8432 90 00 00 at 0%. The table separates product variants sharing the same tariff lines. See the cultivators and farm machinery guide for the wider heading.
Confirm the commodity code against drawings, intended use and whether the shipment contains complete ploughs or separate parts. Zero duty does not remove import VAT, normally 20%. See UK import duty and VAT when preparing the landed-cost calculation.
| Goods | Commodity code | Duty | Anti-dumping or countervailing duty on China |
|---|---|---|---|
| Mounted conventional mouldboard ploughs | 8432 10 00 00 | 0% | None |
| Replacement mouldboards for ploughs | 8432 90 00 00 | 0% | None |
Specify the tractor connection and furrow geometry
State whether the plough is conventional or reversible, mounted or semi-mounted. Agree the linkage category, pin dimensions, tractor lift capacity, implement weight, working width, working depth and clearance between bodies. For reversible models, specify hydraulic connections, operating pressure, turnover movement and transport locking.
Agree the share, mouldboard and landside materials, hardness targets, bolt patterns and replacement drawings. Specify coulters, skimmers, depth wheels and the chosen overload protection. Ask for a soil demonstration with a suitable tractor, showing penetration, furrow inversion, depth consistency and clearance of crop residue.
Request the English operating manual for the supplied configuration. The responsible person must ensure that the technical file is compiled and available on request.
Worked duty example
Illustrative example, not a quote: Illustrative batch of compact tractor-mounted mouldboard ploughs under 8432 10 00 00, invoiced at £21,000 free on board, with £2,500 of freight and insurance to the UK. The customs value is £23,500. Duty at 0% is £0. Import VAT at 20% is charged on the customs value plus duty, £23,500, so it is £4,700. With no duty, the only import tax is the VAT, which a VAT-registered importer can usually reclaim. The import duty and VAT guide explains each step.
Inspection checklist
Tractor fit: check linkage pins, mounting clearances, lift suitability and hydraulic connections against the approved specification; inspect again on arrival for bent brackets or transport damage.
Frame and bodies: check welds, frame alignment, body spacing and share seating against the drawings; look for cracks, distortion and loose or missing fasteners.
Wear parts: compare material and hardness reports with the agreed specification; trial-fit replacement shares, mouldboards and landsides to confirm bolt alignment and seating.
Turnover and documents: operate reversible mechanisms in a controlled demonstration, checking hoses, leaks and locks; match the declaration, marking and English manual to the delivered model. Arrange quality inspection before shipment.
Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us
What goes wrong
A plough can fit the linkage yet overload the tractor's lift or leave insufficient clearance during turnover. Incorrect body alignment or share geometry can produce uneven penetration and poor furrow inversion. Check the assembled sample with the intended tractor and soil conditions before approving production.
Soft shares wear quickly, poorly seated wear parts loosen, and replacement parts with different bolt patterns cannot be fitted without modification. Hydraulic leaks and damaged hoses can interrupt turnover. Keep approved drawings and a fitted spare-parts sample, then compare the delivered batch with them.
Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For machinery and equipment, see machinery imports.
Frequently asked questions
What is the UK import duty on mouldboard ploughs from China?
Read from the UK Trade Tariff on 1 October 2026, ploughs under 8432 10 00 00 carry 0% duty from China, with no recorded trade remedy. Plough parts under 8432 90 00 00 also carry 0%.
Do tractor-mounted mouldboard ploughs need CE or UKCA marking?
Confirm the applicable machinery safety rules, CE or UKCA marking and declaration of conformity with the relevant authority or your customs broker. Check that the documents identify the supplied model and configuration.
What should I tell the factory about my tractor?
Provide the linkage category, pin dimensions, lift capacity and hydraulic details. Agree implement weight, clearances and working width, and demonstrate the sample with a suitable tractor.
Which mouldboard plough spares should I order?
Agree replacement shares, mouldboards, landsides and their fixings. Confirm materials, hardness targets and bolt patterns, then trial-fit the spares to the approved plough.