Sourcing hydraulic pile-driving hammers from China
Hydraulic pile-driving hammers from China carry 0% UK duty under the piledriver line, with no anti-dumping duty recorded. Complete new machinery for Great Britain needs UKCA or CE marking, a declaration of conformity and English instructions. Cambridge China Bridge sources hydraulic pile-driving hammers.
Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for small orders and first imports

UK duty on hydraulic pile-driving hammers
Read from the UK Trade Tariff on 1 October 2026, heading 8430 covers earth and mineral working machinery, including piledrivers and pile extractors. The relevant piledriver line is 8430 10 00 00. The table shows hammer configurations within that same line, rather than separate tariff subdivisions.
The supplied tariff record gives 0% duty for goods from China, with no anti-dumping or countervailing measure, suspension or attached import control recorded for this line. Import VAT is normally 20%. See UK import duty and VAT.
Confirm the commodity code against the actual hammer and the equipment supplied with it. Describe separately supplied power packs, spares and mounting equipment to your broker rather than assuming the hammer code covers everything. See the wider piling and drilling machinery guide.
| Goods | Commodity code | Duty | Anti-dumping or countervailing duty on China |
|---|---|---|---|
| Hydraulic pile-driving hammers | 8430 10 00 00 | 0% | None |
Specify impact energy and hydraulic compatibility
Specify the pile material and section, required impact energy and its adjustment range, ram mass, stroke, blow rate and hammer weight. Give the supplier the carrier or leader drawings, mounting arrangement, pile helmet dimensions and cushion arrangement. Ask how impact energy is measured and agree a witnessed test using a representative pile.
Match oil flow, working pressure, return pressure, hose connections, filtration and cooling to your hydraulic supply. Agree the control system, hose routing, transport supports and seal and wear-part package. Include a drawing showing access for maintenance and the method for isolating stored hydraulic energy.
Complete new machinery placed on the Great Britain market must have UKCA or CE marking, a declaration of conformity and English instructions. If the supplier proposes partly completed machinery, ask why: assembly instructions and a declaration of incorporation apply instead. For equipment within the outdoor noise rules, noise testing, technical documentation and a guaranteed sound power label are required. Ask the supplier to identify the applicable equipment category.
Worked duty example
Illustrative example, not a quote: One hydraulic pile-driving hammer, illustrative values only under 8430 10 00 00, invoiced at £60,000 free on board, with £4,000 of freight and insurance to the UK. The customs value is £64,000. Duty at 0% is £0. Import VAT at 20% is charged on the customs value plus duty, £64,000, so it is £12,800. With no duty, the only import tax is the VAT, which a VAT-registered importer can usually reclaim. The import duty and VAT guide explains each step.
Inspection checklist
Fit: compare mounting dimensions, leader guides, hose fittings and pile helmets with the approved drawings; repeat the checks on arrival.
Impact performance: witness operation with the agreed hydraulic supply and representative pile; record energy settings, blow behaviour, oil temperature and leaks.
Structure and wear: inspect ram guides, anvil, helmet, cushion seats, welds and fasteners; check protective caps and transport restraints on arrival.
Documents and controls: match the serial plate to the declaration and English manual; check the supplied control functions, isolation procedure and applicable noise documents. Use a written inspection brief.
Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us
What goes wrong
A hammer can fit the carrier mechanically yet perform poorly because oil flow, return pressure or cooling is mismatched. A headline energy figure without a measurement method makes acceptance difficult. Incorrect helmet geometry or cushion material can damage the pile head, while unsuitable guides and seals increase wear and leakage.
Agree the test arrangement and acceptance criteria before ordering. Check that documents describe the supplied hammer and control configuration. Request drawings and part identifiers for seals, guides, anvils and cushions, and agree who supports faults after delivery. Factory verification can include checking whether the builder can demonstrate the proposed test.
Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For machinery and equipment, see machinery imports.
Frequently asked questions
What is the UK import duty on hydraulic pile-driving hammers from China?
The supplied tariff record gives 0% under 8430 10 00 00, with no anti-dumping or countervailing measure recorded. Import VAT is normally 20%.
Will a Chinese hydraulic hammer work with my piling rig?
Check mounting drawings, oil flow, working and return pressure, cooling, controls and hose connections. Agree a test using the hydraulic supply and pile arrangement you intend to use.
What documents should a hydraulic pile-driving hammer have?
Partly completed machinery needs assembly instructions and a declaration of incorporation.
How do I check the supplier's impact energy claim?
Ask for the measurement method and test records, then witness a test with the agreed hydraulic supply and representative pile. Include energy settings, blow behaviour and oil temperature in the acceptance record.