Sector guides

Sourcing crosslinkable PE compounds from China

Crosslinkable polyethylene compounds from China have candidate UK tariff rates of 0% to 6%, depending on polymer composition and classification. Confirm with HSE the UK REACH registration position for the polymer, monomers and additives. Match the cure system to your process. Cambridge China Bridge sources crosslinkable polyethylene compounds.

Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for small orders and first imports

Written by Bono Xu, Founder, Cambridge China Bridge · 4 min read · Updated 2026-11-24

Illustrative image: A clear sample jar and shallow dish of white crosslinkable polyethylene compound pellets beside a sealed plain material bag labelled XLPE compound.
Illustrative image

Duty depends on the compound's polymer composition

Read from the UK Trade Tariff on 1 October 2026, heading 3901 covers polymers of ethylene in primary forms. This guide concerns crosslinkable compounds supplied before curing, for cable insulation, pipe extrusion or other conversion processes. The table gives candidate polymer lines, rather than a dedicated crosslinkable-compound code. See the wider polyethylene and EVA guide.

The selected polyethylene lines carry 6% duty on goods from China; the selected ethylene-alpha-olefin copolymer line carries 0%. These lines show no anti-dumping or countervailing duty and no suspension. Do not assume a crosslinkable grade qualifies for the copolymer rate solely because the supplier calls its base resin linear low-density polyethylene. Obtain the composition, specific gravity and additive details before confirming the commodity code.

The UK Trade Tariff attaches waste import and export controls to these lines. Waste shipment controls apply only if the material is waste. For notified waste imported into England from China, the exporter starts the consent application in the dispatch country; shipment follows consent from the Environment Agency and other competent authorities. Ask your customs broker to confirm the control applicable to your material and route before shipping.

UK duty on these lines for goods of Chinese origin (one code per row), read from the UK Trade Tariff on 1 October 2026.
GoodsCommodity codeDutyAnti-dumping or countervailing duty on China
Linear polyethylene below specific gravity 0.94, other grades3901 10 10 906%None
Other polyethylene below specific gravity 0.943901 10 90 906%None
Other polyethylene of specific gravity 0.94 or more3901 20 90 006%None
Other ethylene-alpha-olefin copolymers below specific gravity 0.943901 40 00 900%None

Specify the crosslinking system and cure performance

State whether the compound uses silane, peroxide or a radiation crosslinking process. Describe the intended cable, pipe or moulded application, base polymer, melt flow, density, colour and permitted recycled content. For silane systems, identify the catalyst component and mixing instructions. For peroxide systems, agree extrusion conditions and resistance to premature curing. Set acceptance criteria for gel content, hot-set behaviour where relevant, tensile properties and elongation after the agreed cure.

Agree moisture protection, storage conditions, usable shelf life and batch traceability. Request the technical data sheet, safety data sheet and batch certificate of analysis. Importers are responsible for chemical classification, and substances and mixtures must be labelled and packaged correctly before being placed on the Great Britain market. Review the actual formulation rather than relying on a generic polyethylene document.

Worked duty example

Illustrative example, not a quote: Illustrative order: 20 tonnes of crosslinkable polyethylene compound, subject to classification under 3901 10 90 90, invoiced at £18,000 free on board, with £1,500 of freight and insurance to the UK. The customs value is £19,500. Duty at 6% is £1,170. Import VAT at 20% is charged on the customs value plus duty, £20,670, so it is £4,134. Import taxes total £5,304; a VAT-registered importer can usually reclaim the VAT, so the lasting cost is the £1,170 of duty. The import duty and VAT guide explains each step.

Inspection checklist

Identity: check the producer, grade, batch labels and certificate against the approved formulation, including the catalyst component where supplied separately.

Pellets and packing: check for black specks, fines, fused pellets, damaged liners and broken seals; compare received packing with the agreed moisture protection.

Processing: run a sample using the agreed extrusion and cure conditions; check surface finish, premature curing and consistency against the approved trial.

Cured properties: check gel content and the agreed mechanical or hot-set results on material cured by your process, with retained samples linked to each batch. Use the inspection guide to organise the checks.

Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us

What goes wrong

A compound can match the base resin's melt flow yet fail after curing. Wrong catalyst, changed peroxide content, moisture exposure or unsuitable extrusion conditions can cause premature curing, poor crosslinking or inconsistent properties. Contamination that seems minor in pellets can leave defects in cable insulation or pipe walls.

Approve a processing trial before accepting a substitute grade. Compare incoming batches with the approved formulation and investigate any change in cure response before releasing material to production. Keep catalyst and base-compound batch records together so a failure can be traced.

Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For repeat volumes, see container programmes.

Frequently asked questions

What is the UK import duty on crosslinkable polyethylene compounds from China?

The selected candidate lines carry 6% for polyethylene and 0% for ethylene-alpha-olefin copolymers below specific gravity 0.94, with no anti-dumping or countervailing duty. Confirm the compound's classification.

Does crosslinkable polyethylene need UK REACH registration?

Confirm with HSE whether UK REACH registration or an exemption applies to the polymer, monomers and additives. Check the formulation and registration coverage before importing.

Can I replace a peroxide compound with a silane grade?

Approve the change through a processing and cure trial. Specify the catalyst, mixing method, extrusion conditions and cured properties before accepting the substitute.

Why does the tariff show a waste control for polyethylene compounds?

Waste shipment controls apply if the material is waste. The tariff attaches the control to these lines; ask your customs broker to confirm the position for your material and route.

Sources

  1. UK Trade Tariff — commodity codes and duty
  2. How to comply with REACH chemical regulations
  3. Waste: export and import
  4. How does chemical classification work?
  5. Duties of a Great Britain-based chemical importer

Monthly email

What changed for UK buyers from China, and when to act

One email at the start of each month. Every figure has an official source.

One email a month. Unsubscribe with one click. Privacy

Discuss your sourcing project

Tell us the product, quantity and destination. Our own staff in China verify factories, follow production and inspect before shipment. We reply the same working day to confirm receipt and arrange next steps.

Discuss your sourcing project
Get a quote