Sourcing copper electrical busbars from China
Copper electrical busbars confirmed within heading 7419 carry 0% UK duty from China across the supplied lines. Confirm classification before ordering: plain bars and busbars are covered separately in the reference guide. Electrical components may require individual conformity assessment and marking. Cambridge China Bridge sources copper electrical busbars.
Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for small orders and first imports

Duty and the busbar classification boundary
Heading 7419 covers other articles of copper. This guide concerns fabricated copper electrical busbars only where their classification within that heading is confirmed. The site's reference guide places bars and busbars under 7407; do not assume a copper conductor belongs in 7419 simply because it has been ordered as a busbar.
Read from the UK Trade Tariff on 20 November 2026, all supplied lines carried 0% duty for goods from China. The supplied extract records no anti-dumping or countervailing duty, suspensions or attached import controls. The table shows candidate copper-article descriptions, including hand-made variants, rather than interchangeable codes for the same busbar.
Send your customs broker the drawing, material description, manufacturing operations and intended use to confirm the commodity code. For the wider material context, see copper and brass sheet and strip. Keep plain stock and fabricated parts distinct in the purchase specification.
| Goods | Commodity code | Duty | Anti-dumping or countervailing duty on China |
|---|---|---|---|
| Other fabricated copper articles, where confirmed for the busbar | 7419 80 90 98 | 0% | None |
| Cast, moulded, stamped or forged copper articles, not further worked | 7419 20 00 90 | 0% | None |
| Other hand-made copper articles, where confirmed for the busbar | 7419 80 90 10 | 0% | None |
| Hand-made cast, moulded, stamped or forged articles, not further worked | 7419 20 00 10 | 0% | None |
Specify the conductor and connection surfaces
Specify copper grade, temper, conductivity acceptance criteria, width, thickness, length and tolerances. Show hole positions from agreed datums, slot geometry, bend direction and mating surfaces on the drawing. State whether the busbar is bare, plated or insulated, and define coating coverage and areas that must remain exposed.
Request material certificates tied to the production batch, dimensional reports and agreed conductivity or resistance checks. Describe the intended assembly, current duty, cooling conditions and connection arrangement so the buyer's electrical designer can agree the acceptance tests.
Electrical safety guidance says components may require individual conformity assessment and marking. Confirm the assessment route for the product being supplied. Electrical and electronic equipment, including cables and spare parts, falls within hazardous-substance restrictions unless specifically excluded. Request composition information for copper, plating and insulation for the intended equipment.
Worked duty example
Illustrative example, not a quote: 800 machined copper busbars, assuming this code is confirmed; illustrative only under 7419 80 90 98, invoiced at £20,000 free on board, with £800 of freight and insurance to the UK. The customs value is £20,800. Duty at 0% is £0. Import VAT at 20% is charged on the customs value plus duty, £20,800, so it is £4,160. With no duty, the only import tax is the VAT, which a VAT-registered importer can usually reclaim. The import duty and VAT guide explains each step.
Inspection checklist
Material: match batch identification to the copper certificate and check agreed conductivity or resistance results against the specification.
Geometry: measure thickness, width, hole positions and bends against the drawing; trial-fit samples to the mating terminals without forcing them.
Contact surfaces: check flatness, burr removal, plating coverage and cleanliness; look for scratches or contamination at bolted interfaces.
Insulation and packing: check coverage and damage against the drawing, and confirm separators protect contact faces during transport. Agree the sampling plan through the quality inspection guide.
Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us
What goes wrong
A certificate can describe the raw copper while the delivered part has the wrong thickness, misplaced holes or cracked bends. Burrs prevent clean seating, uneven plating leaves exposed areas, and transit abrasion damages contact faces. Checking only the overall length misses the features that determine assembly fit.
A supplier's current rating may describe a different mounting or cooling arrangement. Agree the test conditions with the electrical designer and retain results for the ordered geometry and finish. Resolve drawing discrepancies before production rather than drilling or bending delivered parts to make them fit.
Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For repeat volumes, see container programmes.
Frequently asked questions
What is the UK import duty on copper busbars from China?
For busbars confirmed within 7419, every supplied line carries 0% duty from China. The extract records no anti-dumping or countervailing duty. Confirm the code before applying this rate.
Are all copper busbars classified under 7419?
Do not assume so. The site's reference guide places bars and busbars under 7407. Ask your broker to classify the actual part using its drawing, material and manufacturing details.
Do copper busbars need individual conformity marking?
Confirm the route for the supplied product and its intended assembly before ordering.
What should I check when copper busbars arrive?
Check material traceability, thickness, hole positions, bends, contact-face flatness, burrs, plating and insulation. Trial-fit samples and review the agreed electrical test results.