Sourcing Collated Siding Nails from China
Collated siding nails made from iron or steel wire carry 0% UK import duty from China, with no anti-dumping duty in the supplied tariff record. For nails intended for structural timber connections, confirm declaration-of-performance and marking requirements with the relevant authority. Specify the gun, shank and exterior finish. Cambridge China Bridge sources collated siding nails.
Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for small orders and first imports

UK duty on collated siding nails
Heading 7317 covers iron or steel nails and similar articles, excluding articles with copper heads. Collated siding nails made from wire, supplied in strips or coils, fall within 7317 00 20 00. The table shows product variants sharing that code.
Read from the UK Trade Tariff on 1 October 2026, the supplied record shows 0% duty for goods from China. It records no anti-dumping or countervailing duty, steel measure, suspension or attached import control for this line. Import VAT is normally 20%; see UK import duty and VAT.
Confirm the material and strip or coil presentation against the commodity-code guide. For the wider heading and related gun fasteners, see collated framing nails.
| Goods | Commodity code | Duty | Anti-dumping or countervailing duty on China |
|---|---|---|---|
| Hot-dip galvanised ring-shank siding nails in coils | 7317 00 20 00 | 0% | None |
Specify the siding, gun and corrosion protection
Give the factory the siding material, backing timber and target nail-gun model. Agree nail length, shank diameter, head diameter, point, shank profile, collation angle, connecting material and coil or strip format. Ask for samples to drive through the actual siding into the intended backing before approving production.
Specify hot-dip galvanised or stainless nails for exterior timber work, with the material or coating requirement written into the order. Agree head seating on the siding: inspect for splitting, surface damage and heads driven through the board. Keep approved samples for comparison with delivered stock.
For nails used in structural timber connections, confirm with the relevant authority whether a declaration of performance and UKCA or CE marking are required. CE marking remains available for construction products placed on the Great Britain market. Match the documents to the supplied nail specification and intended use; testing and certification support can help organise the checks.
Worked duty example
Illustrative example, not a quote: Palletised collated siding nails for a trade stock order, illustrative only under 7317 00 20 00, invoiced at £22,000 free on board, with £2,000 of freight and insurance to the UK. The customs value is £24,000. Duty at 0% is £0. Import VAT at 20% is charged on the customs value plus duty, £24,000, so it is £4,800. With no duty, the only import tax is the VAT, which a VAT-registered importer can usually reclaim. The import duty and VAT guide explains each step.
Inspection checklist
Dimensions: measure nail length, shank and head diameters against the approved drawing; check head centring, point formation and ring profile where specified.
Gun feeding: inspect coil shape or strip alignment and connecting wires or material; test-fire samples in the agreed gun and check for jams, bent nails and inconsistent head seating.
Material and finish: check material evidence against the order, inspect coating coverage and damage around heads and shanks, and measure the agreed coating characteristic on galvanised nails.
Arrival and packing: inspect wet cartons, rust, loose collation and crushed coils; check pack counts or weights and batch identification against the order. Record findings using the quality inspection guide.
Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us
What goes wrong
A nail that fits the magazine can still feed badly when coil geometry or collation differs from the approved sample. Off-centre heads, bent shanks and weak connections cause interruptions. Test the production sample in the buyer's gun rather than relying on a photograph or a factory's compatibility list.
Thin or damaged coatings can leave rust stains on visible siding. Incorrect head size or excessive driving depth can damage the board face. Record the agreed material, finish and head seating, then compare arrival samples with the approved trial assembly before releasing stock.
Cambridge China Bridge sources these products for UK businesses, checking the factory and the documents before shipment. See factory verification. For repeat volumes, see container programmes.
Frequently asked questions
What is the UK import duty on collated siding nails from China?
The supplied tariff record shows 0% for wire nails in strips or coils under 7317 00 20 00, with no anti-dumping or countervailing duty recorded.
Will Chinese siding nails fit my nail gun?
Confirm nail dimensions, head, collation angle, connecting material and coil or strip format. Test production samples in your actual gun before accepting the batch.
Should I buy galvanised or stainless siding nails?
For exterior timber work, specify hot-dip galvanised or stainless nails. Agree the finish with the intended siding and timber, and check coating or material evidence against the order.
Do collated siding nails need CE or UKCA marking?
For nails used in structural timber connections, ask the relevant authority to confirm declaration-of-performance and UKCA or CE marking requirements. Confirm the intended use and match the documents to the supplied nails.