Sector guides

Sourcing motorised skylights from China

Agree the roof opening, glazing, drainage and powered movement with the installer before ordering a motorised skylight. Product paperwork must match the supplied unit. Cambridge China Bridge sources electric skylights and coordinates factory clarification, samples and inspection.

Buying from China for a business? How our UK China sourcing agent service works · China sourcing agent for small orders and first imports

Written by Bono Xu, Founder, Cambridge China Bridge · 4 min read · Updated 2026-12-03

Products and search terms

motorised skylight, electric roof window, sliding rooflight, electric opening skylight, lift up roof window

Illustrative image: An open roof skylight with a clearly visible compact electric chain actuator connecting the frame to the hinged sash, in a simple pitched roof section.
Illustrative image

Start with the roof and opening method

A motorised skylight may slide a glazed panel aside or lift it on hinges using an actuator. These arrangements have different support, weathering and trapping risks. Before contacting factories, have the designer or installer confirm the proposed roof opening and whether the project needs ventilation, access or another function.

Send drawings identifying the structural opening, upstand, roof pitch, waterproofing interface and installation access. Distinguish opening dimensions from overall frame dimensions. Specify which party supplies flashings, seals, controls and cables, and who checks structural support. An attractive catalogue photograph cannot establish compatibility with the roof construction or show whether a moving panel has sufficient clearance at the site.

Specify glazing, movement and control interfaces

Ask for the complete glazing build-up, frame construction, thermal-break details, drainage paths and seal arrangement. Define the performance evidence the designer needs for the proposed location and intended use. Request drawings showing how glass and actuators can be replaced. Ask the factory for available configurations and production timing after it has reviewed the project details, rather than accepting an unspecified catalogue variant.

Set out the power arrangement, controller position, local switches and any rain-sensor or building-control connection. Agree the response to an obstruction, power failure and power restoration, together with a safe maintenance method. Our product development service can coordinate the technical brief and factory clarification, while the project designer and installer approve the building interfaces.

UK duty: complete window versus separate glass

The UK Trade Tariff API, read on 3 December 2026, showed the candidate rates below. An aluminium window assembly points towards heading 7610, while separately imported toughened safety glass may require heading 7007. The glass candidate does not describe an insulating-glass assembly or every laminated product. Ask your customs agent to classify the exact construction and imported condition.

The review covered China anti-dumping, countervailing and tariff suspensions. Both candidates list conditional ship-use and airworthiness suspension entries; these do not establish relief for house renovation. A complete motorised unit should not be divided into convenient tariff descriptions without a classification assessment. Give the agent the frame drawings, glazing description, drive details and packing list, then repeat the measure check before entry.

Candidate codes for Chinese-origin goods; UK Trade Tariff API read on 3 December 2026.
Imported goodsCandidate commodity codeOrdinary third-country duty
Aluminium windows and their frames, where applicable76101000006%
Other toughened safety glass, supplied separately and meeting the line description70071980950%

Building guidance and product conformity

For a project in England, have the designer check Conservation of fuel and power: Approved Document L, Protection from falling, collision and impact: Approved Document K, and Fire safety: Approved Document B where relevant. Approved Documents give guidance on meeting building regulations; the project's application depends on its design and location. Obtain the applicable local requirements for projects elsewhere in the UK.

Under the Construction Products Regulation as it applies in Great Britain, establish whether the unit is covered by a designated standard or technical assessment and obtain the appropriate performance documentation and marking. Have the assessor also consider the Supply of Machinery (Safety) Regulations 2008 for powered movement and the Electrical Equipment (Safety) Regulations 2016 for electrical equipment within scope. Agree the boundary between component evidence and assessment of the complete supplied assembly.

Working out your own order? Send us the product on WhatsApp and we reply the same working day: WhatsApp us

Inspect weathering, movement and delivery condition

Inspect the frame dimensions and squareness, glazing identity, edge protection, seals, drainage openings and finish against the approved drawings. Run the agreed opening and closing sequence, checking alignment, stopping positions, controls and the specified protective responses. Request suitable evidence for weather and thermal performance; a brief factory spray demonstration cannot establish all the performance needed for a building project.

Check the packed unit for restraint of moving panels, protected glass edges and supported lifting points. Reconcile installation drawings, wiring instructions, labels, supplied accessories and service information before shipment. The installer should plan commissioning with the actual roof interface and controls. Retain photographs and component identities so that a later motor or controller substitution can be assessed against the approved configuration.

Frequently asked questions

Does product marking approve the renovation?

Product conformity documentation supports product assessment. The designer and building-control process must still address how the skylight is incorporated into the particular building.

Can the factory choose the glazing?

The factory can propose a build-up, but the designer should approve it against the project's safety, thermal, structural and use requirements before manufacture.

Is adding a motor to a fixed rooflight a simple upgrade?

It changes the assembly and its risks. Review the moving structure, weather seals, control system, protective functions and supporting conformity evidence before adopting that design.

Sources

  1. UK Trade Tariff API: aluminium windows
  2. UK Trade Tariff API: toughened safety-glass candidate
  3. GOV.UK: Approved Documents
  4. GOV.UK: Construction Products Regulation in Great Britain
  5. GOV.UK: Electrical Equipment (Safety) Regulations
  6. GOV.UK: Supply of Machinery (Safety) Regulations

Monthly email

What changed for UK buyers from China, and when to act

One email at the start of each month. Every figure has an official source.

One email a month. Unsubscribe with one click. Privacy

Discuss your sourcing project

Tell us the product, quantity and destination. Our own staff in China verify factories, follow production and inspect before shipment. We reply the same working day to confirm receipt and arrange next steps.

Discuss your sourcing project
Quote for motorised skylights